Lead-in-the-wool tooth blades of special steel, by 2 pieces, 1.5 mm tooth-in-between Proxxon - 28054For cutting all kinds of wood, fiberglass plates and soft plastics.
Hot Tractor kit mechanical metal construction - Time for MachineAssembly without glue or paint, a small flat pliers is enough.Comes with: parts inserts, polishing cloth and an instruction manual.Pre-cut polished stainless steel kit.Number of rooms: 80 piecesDimensions: 112 x 55 x 44 mm
Circuit Carrera Digital 132 DTM Speed Memories slot 1/24Carrera Digital 132 is a Carrera circuit range for everyone (from 8 years old). The Digital 132 is a digital circuit with two 1/32 scale cars that travel on wide 1/24 scale rails. Each car offers 10 speed steps and the ability to limit the maximum speed of the car, define the braking behavior.
Set of suspension rods, complete (front and rear) (includes steering rod (1), front lower rods (2), front upper connecting rods (2), rear connecting rods (4)) (assembled with hollow balls) for Traxxas TRX-4M.
The ROGUE TERRA is the new Monster truck from HOBBYTECH, now in a Brushless version. A new 4-wheel drive chassis, to drive on all terrains and in all weathers. Engine 2200kv Konect brushless featuring a radiator with a fan to maximize reliability.Comes with an engine Konect waterproof.Full version RTR with LiPo battery and charger.
The Smart Fly 180 is a glider motorcycle to perform basic acrobatic tricks (loops, barrels, inverted flight).RTF version with radio, battery and charger.• Wingspan: 1800mm • Weight: 900g
Off-road buggy 1/8 brushless Kyosho inferno MP9e EVO.New RTR version Mounted with 2300kV brushless motor, waterproof dimmer and 2.4GHz radioThis chassis based on the competition version of the MP9E.
Landfreeder Quadtrack TT02FT Kit Tamiya - 58690the Landfreeder is a one-way machine is based on the TT‐02 chassis equipped with a track instead of each wheel. This results in optimal motor skills on all types of rough or slippery terrain.
• For 1/8 & 1/10th Buggy & Track• Dual 775 engines• Power supply 2 x 7.2V Ni-mh or 2 x Lipo 7.4V (or 1 Li-Po 14.8V or 12V battery outside by modifying the connectors).Wired 2 Tamiya sockets in series.
HuiNa's 6-channel crawler crane is a remote control model reproduced using the pressure moulding method. The design and functionality make the vehicle look like a real construction machine.The vehicle presented is made from durable ABS material and metal at scale 1:14. The model is controlled via the remote control operating at the 2.4 GHz frequency. It...
Exhibit base made of wood, which will allow you to show your model of boat.The components of the base, are delivered unredely.Complement of naval modelling.
Electric coal motor type 550.Compatible with most RC electric cars in 1/10th scale type buggy, truggy or Monster Truck...Technical characteristics:Type: Brushed (coal) 550Voltage: 4.8 - 9.6VPower supply: 4-8 Ni-Cd/Ni-MH or 2S Li-PoSize:Total diameter: 36mmAxis diameter: 3.2mm (3.175mm)Cage length: 60mmBetween axis of fixing holes: 25mm
Whether it's 1/10 track or 1/10 off-road, the Razer 60A is always the first choice when reliability, efficiency and durability are the top priorities. Various adjustment and programming options leave nothing to be desired.All of the controller's cables are already wired ready to be connected, no welding is required.Battery connection: DEAN T-takeEngine...
Lipo Traxxas ID 11.1V 25 c 5000 mah 2872 X battery
Compatible Slash, E-revo, XO-1, Spartan
Discharge rate: 25 c
Dimension 155x25x45mm
Use only with a charger Lipo ID
The timber X 1.2 m from Eflite EFL3875 is an ultra versatile high-wing aircraft for all pilots.
Wingspan: 1200mmLength: 1055mmController: 40A brushlessRecommended battery: Li-Po 3S or 4S 2200 with EC3 plug
This PNP version is delivered without radio, without receiver, without battery, without charger.
This Crawler 1/10 off-road electric 4 x 4 ready to roll is characterized by her decks front and rear hanging, each equipped with an engine and a steering servo.Delivered complete with 2.4 GHz radio,. battery Li-ion 7.4v and USB charger.
Dimensions:
• Wheelbase: 320mm • Guard on the ground: 100mm • Product weight: 1.750 g