Banner
There are 44 products.
Reference: PRX-28707
Brand: Proxxon
NG 2/E - Transfo MICROMOT 2A 24VA with Proxxon regulation - 28707 MICROMOT transfos. The safe source of energy for low-voltage MICROMOT devices.
Reference: PRX-28706
Brand: Proxxon
NG 2/S - Transfo MICROMOT 2A 24VA without Proxxon regulation - 28706MICROMOT transfos. The safe source of energy for low-voltage MICROMOT devices.
Reference: PRX-28704
Brand: Proxxon
NG 2/E - Transfo MICROMOT 2A 24VA with Proxxon regulation - 28704MICROMOT transfos. The safe source of energy for low-voltage MICROMOT devices.
Reference: PRX-28132
Brand: Proxxon
MS 4 - MICROMOT machine strand machoire 50 mm for TBM, MB 140/S and MB 200 - 28132Aluminium cast iron.
Reference: PRX-28620
Brand: Proxxon
Flexible 110/P with 3 ball bearings 35000 rpm with 6 pliers from 1 to 3.2 mm - 28620With precision aluminum accessory holders. With fast-tightening chuck.
Reference: PRX-28610
Brand: Proxxon
UHZ - Universal support with clamp, 20mm collar for all MICROMOT Proxxon machines - 28610With patella. Orientable from all sides.
Reference: PRX-28600
Brand: Proxxon
MB 200 - MICROMOT Proxxon drilling support - 28600Head with dovetail steerable at 90 degrees (graded ring available). Allows for sloping drilling and multi-purpose milling.
Reference: PRX-28608
Brand: Proxxon
FMZ - Precision mechanical extend with clamp, opening 70 mm jaws 75 mm Proxxon - 28608With a clamp. Zinc sunk under pressure.
Reference: PRX-28622
Brand: Proxxon
Flexible 110/BF, with 3-jaw chuck - 28622With precision aluminum accessory holders. With steel clamps.
Reference: PRX-28194
Brand: Proxxon
Glue sticks - 7 mm for HKP 220 delivered by 12 Proxxon sticks - 28194
Reference: PRX-28940
Brand: Proxxon
MICROMOT clamping pliers, 6 clamps 1.0 to 3.2 mm Proxxon - 28940Has three slots and soaked. Sizes: 1 - 1.5 - 2 - 2.4 - 3 and 3.2. With clamping nut and storage base
Reference: PRX-28941
Brand: Proxxon
Chuck 3 jaws from 0.3 to 3.2 mm for MICROMOT Proxxon devices - 28941For all MICROMOT devices that accept this equipment: FBS 12/EF grinder-drill, FBS 240/E precision grinder-drill, MICROMOT 60/EF milling drill and micromot 110/BF flexible. Advantageous especially for working with different axis diameters. Clamping range from 0.3 to 3.2.
Reference: PRX-28080
Brand: Proxxon
Replacement wire coil for THERMOCUT, 30 m Proxxon - 28080Coil 30 m x 0.2 mm.
Reference: PRX-28054
Brand: Proxxon
Lead-in-the-wool tooth blades of special steel, by 2 pieces, 1.5 mm tooth-in-between Proxxon - 28054For cutting all kinds of wood, fiberglass plates and soft plastics.
Reference: PRX-28056
Brand: Proxxon
Corridated toothing blades in HSS steel, by 2 pieces, tooth interses 1.06 mm Proxxon - 28056For cutting steel, non-ferrous metal, fiberglass, compressed material, tight fabric, plexiglass and insulation materials.
Reference: PRX-29880
Brand: Proxxon
LG/A2 Proxxon Fast Charger - 29880Charges the PROXXON Li-ion battery in 1h. With built-in temperature control
Reference: PRX-29896
Brand: Proxxon
LG/A2 Proxxon Proxxon Fast Charger - 29880 Charges the PROXXON Li-ion battery in 1h. With built-in temperature control
Reference: PRX-28122
Brand: Proxxon
Toothed crown chuck for TBM 220, 0.5 - 6.5 mm Proxxon - 28122For stems from 0.5 to 6.5 mm.3/8" thread, compatible with TBM 220.
Reference: PRX-20402
Brand: Proxxon
Primus 100 Proxxon Jaw Prism Sliding Machine Vice - 20402Bit width of 100 mm.Aperture 75 mm.
Reference: PRX-20392
Brand: Proxxon
Floor sliding machine with jaw prisms Primus 75 Proxxon - 20392 Bit width of 75 mm.Aperture 65 mm.
Reference: PRX-20394
Brand: Proxxon
Primus Proxxon vice fastening set - 20394
Reference: PRX-27023
Brand: Proxxon
Set of 5 turning tools in HSS steel, in Proxxon wooden box - 27023Superior quality and most common shapes: scraper, 3 mm and 6.4 mm tubes, sharp chisel and slice.
Reference: PRX-27028
Brand: Proxxon
Spindle chuck for the counter-doll for DB 250 Proxxon - 27028Clamping up to 5 mm. To be fixed instead of the rotating counter-tip.
Reference: PRX-27024
Brand: Proxxon
Mandrel 4 bits for wood lathe DB 250 with independent bits Proxxon - 27024Individually adjustable bits.For the tightening of asymmetrical wooden parts.
Reference: PRX-27026
Brand: Proxxon
3-bit concentric clamping chuck for wood lathe DB 250 Proxxon - 27026Concentric clamping.Steel under pressure.
Reference: PRX-28602
Brand: Proxxon
FMS 75 - Precision mechanical floor with suction cup, opening 70 mm jaws 75 mm Proxxon - 28602With gasket. In zinc cast under pressure.
Reference: PRX-28572
Brand: Proxxon
Spare knives for MSG set of 5 different pieces Proxxon - 28572 Superior quality bimetal (made in Japan). A V-shaped blade, a large and a small rounded blade, a flat blade with a straight tip and a flat blade with a rounded tip.
Reference: PRX-28410
Brand: Proxxon
Tool holder for MICROMOT devices with Proxxon 28410 aluminum headFor stationary use of MICROMOT precision power tools with metal drive head in combination with a vice.
Reference: PRX-28566
Brand: Proxxon
OFV - Cutting adapter, guide for milling Proxxon 28566 For MICROMOT tools with 20 mm collar. For grooving, milling grooves and edges.
Reference: PRX-24014
Brand: Proxxon
Inter-tip turning device for PD 250/E Proxxon tower - 24014 Inter-tip turning device. For high precision work with high concentricity.
Reference: PRX-24038
Brand: Proxxon
Clamping device with clamps ER 20 for tower PD 250/E Proxxon - 24038Clamping device with clamps type ER 20.For an extreme concentricity of 2 - 10 mm.
Reference: PRX-24036
Brand: Proxxon
Individually adjustable 4-bit chuck, Ø 75 mm for TOWER PD 250/E Proxxon - 24036For the tightening of angular and asymmetrical parts.
Reference: PRX-24026
Brand: Proxxon
Universal turret for tower PD 250/E Proxxon - 24026Chisel support, easy assembly!For quick replacement of chisels and easy height adjustment.
Reference: PRX-24024
Brand: Proxxon
Separate tool holder fits on the turret of the PD 250/E Proxxon lathe - 24026For chisel support ref 24026.
Reference: PRX-24010
Brand: Proxxon
Fixed bezel for tower PD 250/E Proxxon - 24010Fixed bezel for long parts (especially longitudinal turning).Up to ø 40mm.Also essential when the mobile doll can not be used.
Reference: PRX-24554
Brand: Proxxon
Replacement blade for Proxxon blade holder - 24554HSS cobalt blade.12 x 3 x 85 mm
Reference: PRX-24217
Brand: Proxxon
Blade holder with blade for tower PD 250/E Proxxon - 24217For the PD 250/E quick change system.Allows you to cut parts to length and drill grooves.
Reference: PRX-24020
Brand: Proxxon
Mandrel up to 10 mm for LATHE PD 250/E Proxxon - 24036Industrial chuck with CM 1For the mobile doll of the PD 250/E lathe.
Reference: PRX-28578
Brand: Proxxon
Multiform knife sharpening stone for MSG Proxxon - 28578Profile multiform sharpener for all replacement blades MSG ref 28572. Oil stone for sharpening blades.
Reference: PRX-28082
Brand: Proxxon
Spare cutting wire for THERMOCUT 12/E, 10 pieces Proxxon - 2808210 deformable cutting wires 285 x 0.85 mm.
Reference: PRX-21232
Brand: Proxxon
Adapter for sharpening helical forests up to Ø 3 mm - Proxxon 21232Ø 1.5 to 3 mm for BSG 220 sharpener.1 piece of each in diameter 1.5 - 1.6 - 2 - 2.4 - 2.5 and 3 mm.Clean packaging in a wooden box with sliding lid.
Reference: PRX-27078
Brand: Proxxon
Stop for hot wire cutter THERMOCUT TA 300 Proxxon - 27078For the production or reproducible precise of geometric shapes. For safe cutting of tall workpieces.
Reference: PRX-28992
Brand: Proxxon
Extension cord for MICROMOT Proxxon devices - 28992300 cm.For 12-volt appliances.Male and female plugs with polarity.
Reference: PRX-27076
Brand: Proxxon
Stop for hot wire cutter THERMOCUT TA 300 Proxxon - 27078For the production or reproducible precise of geometric shapes. For safe cutting of tall workpieces.
