MICROMOT clamps, 6 pieces 1.0 to 3.2 mm Proxxon

MICROMOT clamping pliers, 6 clamps 1.0 to 3.2 mm.

Has three slots and soaked. Sizes: 1 - 1.5 - 2 - 2.4 - 3 and 3.2.
With clamping nut and storage base (see the note opposite on the right).

1. Micromot steel clamps are quenched, which gives them a high and constant elasticity. They retain the necessary precision even after long use (incomparable to unspended clamps with 4 slots or those made of brass or aluminum).
2. The triple slot which is much more difficult to achieve than a quadruple slot, allows to obtain a better seat.
3. This is especially important for the centering of small diameter stems.

Drilling chuck or clamping pliers?

Our drilling chuck (Ref 28941) provides more comfort by allowing a quick change of tool when working with different axes (e.g. HSS drill according to DIN 338). Due to its technical structure, however, it has disadvantages compared to clamping pliers: lower clamping force and higher rotin tolerance. If high accuracy is required, it is imperative to work with MICROMOT clamps.