Chuck 3 jaws from 0.3 to 3.2 mm for MICROMOT Proxxon devices - 28941
For all MICROMOT devices that accept this equipment: FBS 12/EF grinder-drill, FBS 240/E precision grinder-drill, MICROMOT 60/EF milling drill and micromot 110/BF flexible. Advantageous especially for working with different axis diameters. Clamping range from 0.3 to 3.2.
For all MICROMOT devices that accept this equipment: FBS 12/EF grinder-drill, FBS 240/E precision grinder-drill, MICROMOT 60/EF milling drill and micromot 110/BF flexible. Advantageous especially for working with different axis diameters. Clamping range from 0.3 to 3.2.
Drilling chuck or clamping pliers?
Our drilling chuck brings more comfort by allowing a quick tool change when working with different axes (e.g. HSS drill according to DIN 338). Due to its technical structure, however, it has disadvantages compared to clamping pliers: lower clamping force and higher rotunda tolerance. If high accuracy is required, it is imperative to work with MICROMOT clamps.
For further information on the nature of the review controls, as well as the possibility of contacting the author of the review please consult our CGU.
No inducements have been provided for these reviews
Reviews are published and kept for a period of five years
Reviews can not be modified: If a customer wishes to modify their review then they can do so by contacting Verified Reviews directly to remove the existing review and publish an amended one
The reasons for deletion of reviews are available here.
5 /5
Based on 1 customer reviews
1
0
2
0
3
0
4
0
5
1
Sort reviews by :
PIERRE-YVES L.
published the 30/07/2023following an order made on 25/07/2023
MICROMOT clamping pliers, 6 clamps 1.0 to 3.2 mm Proxxon - 28940Has three slots and soaked. Sizes: 1 - 1.5 - 2 - 2.4 - 3 and 3.2. With clamping nut and storage base