Banner
The ROGUE BUGGY is the new buggy from HOBBYTECH in a Brushless version. A new 4-wheel drive chassis, to drive on all terrains and in all weathers. Engine 2200kv Konect brushless featuring a radiator with a fan to maximize reliability.
Comes with an engine Konect waterproof.
Full version RTR with LiPo battery and charger.
The ROGUE BUGGY is the new 4x4 buggy from HOBBYTECH in a Brushless version. A new 4-wheel drive chassis, to drive on all terrains and in all weathers.
This buggy has a 4-wheel drive transmission, Konect by Hobbywing electronics and is equipped with big bore shock absorbers made entirely of aluminum.
Engine 2200kv Konect brushless featuring a radiator with a fan to maximize reliability.
Technical characteristics:
4x4 drive by universal shaft
Reinforced lower triangulation
3 Steel pinion differentials
Aluminum big bore shock absorbers
Aluminum Triangle Axle Support
100% on ball bearings
Waterproof radio box
Painted and decorated bodywork
Heavy-duty calipers and knuckle holders
Water-resistant receiver housing
Radio system KT3X
Engine brushless Konect 3652 4-Pole 2200kv
Controller brushless 60A (XT60) accepts lipo 2 and 3S
Konect Servo 7kg-0.18s Metal Sprockets
Montesr Truck type tyres
Instruction Manual
1 x 2S 4200mAh battery included
1 LIPO220 charger included
Size:
Max. height: 215 mm
Length: 490 mm
Wheelbase: 329 mm
Front track: 300 mm
Rear track: 310 mm
Front ground clearance: 48 mm
Rear ground clearance: 50 mm
Total weight: 2330 gr
Necessary not included:
- 4x R6 (AA) batteries for the radio
Reference: GT-C607D
Brand: GT-Power
Charger-unloader, for NiMh, NiCd, Li-Ion, LiPo, LiFe batteries, LiHV and Pb with balancer, mains and 12 volts. Power 80W!Comes with various adapters.
Reference: GT-SD4
Brand: GT-Power
SD4 GT-Power LiPo/LiFe/NiMh charger Charger for LiPo, LiFe, and Ni-Mh batteries with balancer built-in, 100-240V mains. Features: Load batteries Lipo, LiFe 2 S 4 S and NiMh 4 S to 8 S.Power supply: AC 100-240vLoad current: 0.5/1/1.5/2/2.5/3/3.5/4A Comes with a charge DEAN lead.
Reference: KN-LP2S5200
Brand: Hobbytech
Konect 7.4v 5200mah battery taken DEAN. -Battery Lipo KRYPTON (2S) HARD CASE (hard case) -Capacity: 5200 mah -Discharge rate: 50 c continuously and 100 c to a point -Voltage: 7.4V / 2s / 2 p -Connector Type "DEAN" -Length: 140 mm -Width: 47 mm -Thickness: 25 mm -Weight: 270 g With removable balancing intake protection.
Reference: XT60DEAN
Brand: DYS
This Dean Male to female XT60 adapter allows for example to connect a battery in Dean take on a male XT60 connector.
Reference: KN-LP2S4200
Brand: Hobbytech
Konect 7.4v 4200mah battery taken DEAN. -Battery Lipo Konect (2S) HARD box (rounded hard shell) -Capacity: 4200 mah -Discharge rate: 40 c continuously and 80 c to a point -Voltage: 7.4V / 2s / 2 p -Connector Type "DEAN" -Length: 139 mm -Width: 47 mm -Thickness: 25 mm -Weight: 230 g With removable balancing intake protection.
Reference: GE3-5300-2D-60-T03
Brand: Gens ACE
Reference: T1269
Brand: T2M
Integrated 220V alternative power chargerRecommended to charge Li-PO, Li-ION, Li-FE (2S to 3S: 6.6V to 11.1V), and Ni-MH, Ni-CD (4-8S: 4.8V to 9.6V).
Reference: T1342002C
Brand: T2M
Battery T2M Powerhouse 7.4v 4200mah 40C DEAN plug.
Reference: T1245
Brand: T2M
Allows you to quickly charge a pack of Li‐Po batteries of 2 to 4 elements, the most commonly used in model making.• Power supply: 100 to 240V (AC cable included)• Charging current: 4A (50W power)• Recommended for Li‐Po batteries with a minimum capacity of 2,000mAh
The ROGUE BUGGY is the new buggy from HOBBYTECH in a Brushless version. A new 4-wheel drive chassis, to drive on all terrains and in all weathers. Engine 2200kv Konect brushless featuring a radiator with a fan to maximize reliability.
Comes with an engine Konect waterproof.
Full version RTR with LiPo battery and charger.
