EasyStar 3 RTF Mode 2/4 1.37m Multiplex

A third generation for the Multiplex EasyStar, perfectly adapted to the needs of the beginner in model aeronautics, even easier to fly.
Developed from the EasyStar II, this new version benefits from many improvements:

The versions RR,RR+ and RTF are equipped with the Multiplex MS-12020-MG fin servos as standard. This allows you to acquire the basics of piloting on the 3 axes (elevator, direction and ailerons) without additional equipment.

- The puppets are now screwed and glued,
- The servos are metal geared,
- New decoration board,
- New ROXXY engine.

The model is to be assembled and the basic fittings are included
You install all the electronic components you already have. Head to your workshop...

Content:
Model in 100% completed ELAPOR® incl. ROXXY BL Outrunner C28-30-1100kV motor, ROXXY BL-Control 720 S-BEC controller, mounted 7x6" propeller, 4 MS-12020-MG servos, painted canopy, installed decoration board and detailed instructions

- 1 EasyStar 3 propulsion set
- 4 MS-12020-MG servos installed
- All the necessary small accessories
- accessories for the installation of fins (horns, linkage, etc.)
- 1 illustrated leaflet in French
RC functions: steering, elevator, engine, optional: ailerons

Technical characteristics EasyStar3 Multiplex:

Wingspan: 1.36m
Length: 97cm
Wing area: 28 dm²
Wing loading: 25 g/dm²
Mass: 680g
Recommended battery: 11.1V (3s) in 2200mAh
Number of channels: 4/5
Flight time: about 20 min