Banner
The Inferno NEO 3.0 VE RTR (34108T) is a Kyosho buggy mounted with a powerful 2000Kv Torx 8 engine, based on the famous MP7.5 chassis and sold in a readyset version already assembled factory. It is capable of accelerating from 0 to 50 meters in less than 3.5 seconds! Sold with a very pleasant radio to use and adjustable with precision, the Syncro KT-231P.
INFERNO NEO 3.0 VE EP ReadySet READYSET (KT331P/2.4Ghz) - 34108T
Power and acceleration that disregard common sense with unparalleled agility.
Factory-mounted Inferno NEO 3.0 VE Readyset delivers 0-50 m acceleration in 3.5 seconds. With its formidable reputation built on the biggest international races, the 3.0 VE uses the chassis base of the flagship model by adding a brushless controller/engine set. The Syncro KT-231P radio offers vastly improved control and precision settings with the end-of-race, dual rate setting, combined with a steering servo with torque and high speed. In addition, the powerful KYOSHO SPEED HOUSE brushless engine and ESC combine with high-volume shock absorbers and KC Cross tires to deliver superior performance on any surface. The Inferno NEO 3.0 VE allows everyone to test the limits of common sense with a powerful brushless engine.
Chassis assembled with the body in a set ready to roll the day or you buy it.
4-wheel drive, 3 differentials and a low center of gravity.
Large volume shocks, independent suspension on all 4 wheels.
Fully on bearings, with 18 bearings mounted on the transmission and suspension.
Oversized suspension triangles for more stiffness.
Wide range of options to customize its chassis.
Metal central crown, module 1.
High-precision, machined reinforced ginfor front, rear and center differentials,
ensuring an efficient handling of the harshest conditions.
Tools provided: allen keys 1.5/2.0/2.5/3.0, 17mm wheel key, cross key.
Chassis technical features :
Length 469mm
Width 307mm
Height 189mm
323-328mm wheelbase
Track (Av/Arr) 258mm/261mm
Tires (Av/Arr) - 115-44mm/115-44mm
Transmission report 12.7:1
Weight 3,550g (approx.)
2.4GHz Syncro KT-231P transmitter
Content:
- Factory-mounted and set chassis
- Painted, cut and decorated body
- 2.4GHz Syncro KT-231P transmitter
- Key allen 1.5-2.0-2.5-3.0mm
- Cross key
- 17mm wheel key
Start-up needs :
- 4 AA-type alkaline batteries for the transmitter
- Propulsion battery
- Battery-friendly charger
- Phillips screwdriver (large, small)
- Technical features
Reference: GT-C607D
Brand: GT-Power
Charger-unloader, for NiMh, NiCd, Li-Ion, LiPo, LiFe batteries, LiHV and Pb with balancer, mains and 12 volts. Power 80W!Comes with various adapters.
Reference: KN-LP2S5200
Brand: Hobbytech
Konect 7.4v 5200mah battery taken DEAN. -Battery Lipo KRYPTON (2S) HARD CASE (hard case) -Capacity: 5200 mah -Discharge rate: 50 c continuously and 100 c to a point -Voltage: 7.4V / 2s / 2 p -Connector Type "DEAN" -Length: 140 mm -Width: 47 mm -Thickness: 25 mm -Weight: 270 g With removable balancing intake protection.
Reference: KN-LP2S3600
Brand: Hobbytech
Konect 7.4v 3600mah battery taken DEAN. -Battery Lipo Konect (2S) HARD box (rounded hard shell) -Capacity: 3600 mah -Rate of discharge: 30 c continuous and 60 c to a point -Voltage: 7.4V / 2s / 2 p -Connector Type "DEAN" -Length: 139 mm -Width: 47 mm -Thickness: 25 mm -Weight: 200 g With removable balancing intake protection.
Reference: KN-LP2S4200
Brand: Hobbytech
Konect 7.4v 4200mah battery taken DEAN. -Battery Lipo Konect (2S) HARD box (rounded hard shell) -Capacity: 4200 mah -Discharge rate: 40 c continuously and 80 c to a point -Voltage: 7.4V / 2s / 2 p -Connector Type "DEAN" -Length: 139 mm -Width: 47 mm -Thickness: 25 mm -Weight: 230 g With removable balancing intake protection.
The Inferno NEO 3.0 VE RTR (34108T) is a Kyosho buggy mounted with a powerful 2000Kv Torx 8 engine, based on the famous MP7.5 chassis and sold in a readyset version already assembled factory. It is capable of accelerating from 0 to 50 meters in less than 3.5 seconds! Sold with a very pleasant radio to use and adjustable with precision, the Syncro KT-231P.
