Truck tipper UGM-11 Puzzle 3D wood UGEARS

Difficulty: 3 (Expert)

Age: 14 years

The four-cylinder engine is powered by a crankshaft that draws its power from a drive shaft fully functional shot by a rubber band motor and a gear system.

The UGM-11 truck has 3 modes of operation, forward, backward and stop, all controlled by a gear shift lever on the side. When this lever is on stop mode, it is possible to start the engine 4 cylinders and thus observe the 4 pistons move under the hood. You can also take a look at the cabin door, you will notice the fully functional steering wheel connected to the front wheels via a steering column. You'll also see by pressing the front of the truck suspensions only made of wood, it is really realistic.

The elastic engine is of type meandered with a lever on top of the cabin mechanism. The accelerator (gas) pedal increases the engine when pressed on it, which significantly increases the realistic aspect of this construction kit.

The UGM-11 truck requires a little more time than the other models for Assembly. The Assembly manual to withheld attention to perfectly guide you through the Setup process.

A assemble yourself,. without the use of glue.

Model dimension: 34 x 12 x 12 cm
Number of rooms: 420

Assembly: about 15 h to 20 h