Banner
Carwler in 1/18 scale UTAH.
The latest addition to FTX's 1/18th scale Rock Crawlers lineup is the UTAH, an LCG concept chassis, inspired by the latest 1/10th scale competition gear and capable of taking on almost any terrain both indoors and outdoors. The aluminum chassis frame accommodates a forward-leaning engine for a very low center of gravity (LCG).
The latest addition to FTX's 1/18th scale Rock Crawlers lineup is the UTAH, an LCG concept chassis, inspired by the latest 1/10th scale competition gear and capable of taking on almost any terrain both indoors and outdoors. The aluminum chassis frame accommodates a forward-leaning engine for a very low center of gravity (LCG).
A servo-on-axle (SOA) design provides sharper, more precise steering, while the front and rear portal axles help provide maximum clearance on rough terrain.
Adjustable, oil-filled large-diameter shocks with aluminum caps can be mounted from a wide selection of revised mounting points to suit your terrain. Increased track width, combined with oversized, super-sticky block tires, helps produce a safe ride.
The revised transmission, with centered driveshaft, handles the power of a large 280 rpm and 58 rpm engine and, with servo change, the 2-speed transmission allows for a jump in gear from rock exploration to rock racing at the touch of a button. Complemented by a low-profile, low-profile body, the UTAH is ready to become your go-to tracked vehicle, anywhere, anytime!
Characteristics:
Ready to ride
2.4 GHz radio system
LCG Concept Alum angled motor. Chassis
Heavy-gauge oil-filled shocks with aluminum caps
Servo-on-Axle (SOA) for more precise steering
Front and rear high clearance portal axles
Oversized 68mm Comp Spec tires
Big Block 58T Engine, Size 280
7.4 V 2S 360 mAh LiPo battery
Electronic configuration design for optimal weight bias
4-channel ESC/RX with super smooth throttle response at low speeds
Lightweight pinched LCG bodywork
Heavy-duty plastic driveshaft
All-metal gears in gearbox and transmission axles
2-speed transmission
Wider track width
Characteristics:
Length: 225 mm
Width: 138 mm
Height: 98 mm
Wheelbase: 160 mm
Requires 4 AAA batteries for remote control.
Specific References
Carwler in 1/18 scale UTAH.
The latest addition to FTX's 1/18th scale Rock Crawlers lineup is the UTAH, an LCG concept chassis, inspired by the latest 1/10th scale competition gear and capable of taking on almost any terrain both indoors and outdoors. The aluminum chassis frame accommodates a forward-leaning engine for a very low center of gravity (LCG).
