Interfacing Oracover yellow transparent 2 m

Film shrink polyester of high technology.
Width 60cm.

Delivered in 2 m roll.

ORACOVER IS UNDOUBTEDLY THE PRODUCT OF REFERENCE IN THE FIELD OF POLYESTER FILM SHRINK FOR THE RECOVERY OF AIRCRAFT REDUCED MODELS. Its technical characteristics very developed and patented make it a product of unsurpassed quality to this day: Extreme ease of installation: thanks to the process of pigmentation in multi layers: two layers of hard pigments enclose a layer of flexible pigment and a transparent adhesive reacting to the heat is applied. The result is that you can install, remove and apply the film again thereby correcting the errors of installation which is impossible with a classic film. Exceptional ability to stretch and shrink: ORACOVER can be stretched or change at will using a heat source such as a film iron or a heat gun. The possibility of stretching is such that it allows to eliminate almost all the folds around the edges. ORACOVER can be applied with a very wide range of temperatures. A standard installation is done at approximately 100-120 ° C. At this temperature the product virtually retains its dimensions. If you increase the temperature, the product will begin to retract proportionally to the temperature used is 1% per 10 ° C. 150 ° C the retraction will be approximately 5% longitudinally and vertically. The melting point is located at 250 ° C. ORACOVER is also a clean product since it does not contain any heavy metals. ORACOVER is available in rolls of 2, 10 and 50 metres in an extraordinary range of 70 colors.