![Pirate XT-S Brushless Monster 4 x 4 RTR 2.4 GHz T2M T2M T4941B - 1 Pirate XT-S Brushless Monster 4 x 4 RTR 2.4 GHz T2M T2M T4941B - 1](https://www.nextmodelrc.com/29073-large_default/t4941b-pirate-xt-s-brushless-monster-4-x-4-rtr-24-ghz-t2m.webp)
![Pirate XT-S Brushless Monster 4 x 4 RTR 2.4 GHz T2M T2M T4941B - 1 Pirate XT-S Brushless Monster 4 x 4 RTR 2.4 GHz T2M T2M T4941B - 1](https://www.nextmodelrc.com/29073-large_default/t4941b-pirate-xt-s-brushless-monster-4-x-4-rtr-24-ghz-t2m.webp)
Banner
Pirate XT-S Brushless Ready to roll off-road Monster 4 x 4 2.4 GHz T2M - T4941B
• Length: 450mm
• Width: 330mm
• Height: 200mm
• Weight: 2,850 g
Here's the new monster of T2M, completely pre-assembled, 1/10-4 wheels and 2 differentials is equipped with a powerful engine 3421 Kv brushless with controller.
Robust chassis, proven design, hydraulic shock absorbers, tires to rafters and large volume enabled him to evolve on all types of surfaces at high speed.
Technical features:
• Ribbed blue anodized aluminum chassis
• Side protection polycarbonate bibs
• Four wheel independent suspension
• Engine 3421 kV brushless
• Controller-front/rear/brake compatible LiPo 2s / 3s
• Crown engine under carter waterproof
• 2 precision bevel differentials
• All-wheel drive entirely on ball bearings
• Cardan steel processes (CVD in front)
• Hydraulic dampers large constant volume with spring preload adjustment wheel.
• Pinch front and rear adjustable by turnbuckles to not reverse.
• Tires to rafters
• Dongle radio
• Radio control system 3-way 2, 4 GHz preinstalled
Model dimensions:
• Length: 450mm
• Width: 330mm
• Height: 200mm
• Weight: 2,850 g
Additional info:
• Battery pack Li‐Po 7, 4V 3200 mAh included.
• Requires a Charger Li - Po Jack DEAN and 4 batteries 1, 5V AA for the transmitter.
Reference: GT-C607D
Brand: GT-Power
Charger-unloader, for NiMh, NiCd, Li-Ion, LiPo, LiFe batteries, LiHV and Pb with balancer, mains and 12 volts. Power 80W!Comes with various adapters.
Reference: GT-SD4
Brand: GT-Power
SD4 GT-Power LiPo/LiFe/NiMh charger Charger for LiPo, LiFe, and Ni-Mh batteries with balancer built-in, 100-240V mains. Features: Load batteries Lipo, LiFe 2 S 4 S and NiMh 4 S to 8 S.Power supply: AC 100-240vLoad current: 0.5/1/1.5/2/2.5/3/3.5/4A Comes with a charge DEAN lead.
Reference: KN-LP2S5200
Brand: Hobbytech
Konect 7.4v 5200mah battery taken DEAN. -Battery Lipo KRYPTON (2S) HARD CASE (hard case) -Capacity: 5200 mah -Discharge rate: 50 c continuously and 100 c to a point -Voltage: 7.4V / 2s / 2 p -Connector Type "DEAN" -Length: 140 mm -Width: 47 mm -Thickness: 25 mm -Weight: 270 g With removable balancing intake protection.
Reference: KN-LP2S3600
Brand: Hobbytech
Konect 7.4v 3600mah battery taken DEAN. -Battery Lipo Konect (2S) HARD box (rounded hard shell) -Capacity: 3600 mah -Rate of discharge: 30 c continuous and 60 c to a point -Voltage: 7.4V / 2s / 2 p -Connector Type "DEAN" -Length: 139 mm -Width: 47 mm -Thickness: 25 mm -Weight: 200 g With removable balancing intake protection.
Reference: KN-LP2S4200
Brand: Hobbytech
Konect 7.4v 4200mah battery taken DEAN. -Battery Lipo Konect (2S) HARD box (rounded hard shell) -Capacity: 4200 mah -Discharge rate: 40 c continuously and 80 c to a point -Voltage: 7.4V / 2s / 2 p -Connector Type "DEAN" -Length: 139 mm -Width: 47 mm -Thickness: 25 mm -Weight: 230 g With removable balancing intake protection.
Reference: KN-LP2S7200
Brand: Hobbytech
Konect 7.4v 7200mah battery taken DEAN. -Battery Lipo KRYPTON (2S) HARD CASE (hard case) -Capacity: 7200 mah -Discharge rate: 50 c continuously and 100 c to a point -Voltage: 7.4V / 2s / 2 p -Connector Type "DEAN" -Length: 138 mm -Width: 47 mm -Thickness: 25 mm -Weight: 330 g With removable balancing intake protection.
Pirate XT-S Brushless Ready to roll off-road Monster 4 x 4 2.4 GHz T2M - T4941B
• Length: 450mm
• Width: 330mm
• Height: 200mm
• Weight: 2,850 g