Banner
2.4GHz radio system
4-pole brushless engine 3250Kv size 3652
Brushless Variator 50Amp waterproof KONECT "BY HOBBYWING"
Management servos 7kg metal gables
Front and rear gable differentials
Fully aluminum shock absorbers
Front and rear roll bar
Fully mounted on ball bearings
Easy maintenance
Central Slipper for progressive accelerations
Water-resistant receiving box
Comes with a motorization Hobbywing waterproof, with Battery - USB Charger
Brand designed and developed in France.
The BXR.MT is a new 1/10th XL Monster Truck platform with unrivalled power on the market!
The platform incorporates the technical features of the BXR. S1 with in addition many reinforced parts:
Front and rear triangulation, aluminum front and rear shock holder, aluminum cell reinforcements, aluminum reinforcement bar support, all mounted on new Monster 132 x 57mm tires.
Out of its box the vehicle comes with front and rear metal gable differentials as well as an adjustable central slipper, large volume shock absorbers entirely made of aluminum and "CVD" type cardans at the front complete a steel cardans composite transmission and fully mounted on bearings.
An aluminum chassis and side protection pads allow the vehicle to withstand all racing conditions. Powered by a 50Amp waterproof dimmer and a 3500kv brushless engine for maximum power and top speed.
WARNING: This vehicle is a power monster!
Here is its new version "Limited Edition" for the 20th anniversary of the brand, at an exceptional price!
All aluminum pieces are black anodized and logoized, and we also included in addition to the initial version the 4 aluminum triangle axis wedges instead of plastic.
Technical features:
Very Large Volume shock absorbers made entirely of aluminum
Tires Big Football Monster Special
Front and rear steel gable differentials
Front and rear roll bar
Enhanced lower triangulation
CNC aluminium front and rear shock holders
Front and Rear Cell Reinforcements in CNC Aluminium
3mm xl-size aluminium chassis with plastic side protections
Fully mounted on ball bearings
Adjustable central slipper
Central crown protection and secure engine gable
2.4GHz radio system / adjustable end of race
4-pole brushless engine 3150Kv size 3652
Brushless Variator 50Amp waterproof KONECT "BY HOBBYWING"
Management servos 7kg metal gables
Receipt box water resistant
Special Monster Body Look Aggressive
Lipo 2S 7.4V 3600mAh Taken Dean included
- LiPo 2S charger Usb uncluded
Size:
Maximum height: 204mm
Wheelbase: 285mm
Track (front) max. : 312mm
Maximum lane (rear): 318mm
Front ground clearance: 61mm
Rear ground clearance: 64mm
Total weight (without battery): 2295gr
Need not included:
- 4x Batteries R6 (AA) for radio
Reference: GT-C607D
Brand: GT-Power
Charger-unloader, for NiMh, NiCd, Li-Ion, LiPo, LiFe batteries, LiHV and Pb with balancer, mains and 12 volts. Power 80W!Comes with various adapters.
Reference: GT-SD4
Brand: GT-Power
SD4 GT-Power LiPo/LiFe/NiMh charger Charger for LiPo, LiFe, and Ni-Mh batteries with balancer built-in, 100-240V mains. Features: Load batteries Lipo, LiFe 2 S 4 S and NiMh 4 S to 8 S.Power supply: AC 100-240vLoad current: 0.5/1/1.5/2/2.5/3/3.5/4A Comes with a charge DEAN lead.
Reference: KN-LP2S5200
Brand: Hobbytech
Konect 7.4v 5200mah battery taken DEAN. -Battery Lipo KRYPTON (2S) HARD CASE (hard case) -Capacity: 5200 mah -Discharge rate: 50 c continuously and 100 c to a point -Voltage: 7.4V / 2s / 2 p -Connector Type "DEAN" -Length: 140 mm -Width: 47 mm -Thickness: 25 mm -Weight: 270 g With removable balancing intake protection.
Reference: KN-LP3S4200
Brand: Hobbytech
Battery 11.1V 4200mah Konect taken DEAN. -Battery Lipo KRYPTON (3S) HARD CASE (hard case) -Capacity: 4200 mah -Discharge rate: 40 c continuously and 80 c to a point -Voltage: 11.1V / 3s / 1 p -Connector Type "DEAN" -Length: 139 mm -Width: 47 mm -Thickness: 25 mm -Weight: 316 g
Reference: KN-LP2S3600
Brand: Hobbytech
Konect 7.4v 3600mah battery taken DEAN. -Battery Lipo Konect (2S) HARD box (rounded hard shell) -Capacity: 3600 mah -Rate of discharge: 30 c continuous and 60 c to a point -Voltage: 7.4V / 2s / 2 p -Connector Type "DEAN" -Length: 139 mm -Width: 47 mm -Thickness: 25 mm -Weight: 200 g With removable balancing intake protection.
Reference: KN-LP2S4200
Brand: Hobbytech
Konect 7.4v 4200mah battery taken DEAN. -Battery Lipo Konect (2S) HARD box (rounded hard shell) -Capacity: 4200 mah -Discharge rate: 40 c continuously and 80 c to a point -Voltage: 7.4V / 2s / 2 p -Connector Type "DEAN" -Length: 139 mm -Width: 47 mm -Thickness: 25 mm -Weight: 230 g With removable balancing intake protection.
Reference: KN-LP3S3600
Brand: Hobbytech
Battery 11.1V 3600mah Konect taken DEAN. -Battery Lipo KRYPTON (3S) HARD CASE (hard case) -Capacity: 3600 mah -Rate of discharge: 30 c continuous and 60 c to a point -Voltage: 11.1V / 3s / 1 p -Connector Type "DEAN" -Length: 139 mm -Width: 47 mm -Thickness: 25 mm -Weight: 260 g
Reference: GE3-5300-2D-60-T03
Brand: Gens ACE
2.4GHz radio system
4-pole brushless engine 3250Kv size 3652
Brushless Variator 50Amp waterproof KONECT "BY HOBBYWING"
Management servos 7kg metal gables
Front and rear gable differentials
Fully aluminum shock absorbers
Front and rear roll bar
Fully mounted on ball bearings
Easy maintenance
Central Slipper for progressive accelerations
Water-resistant receiving box
Comes with a motorization Hobbywing waterproof, with Battery - USB Charger
Brand designed and developed in France.
