Banner
MBS 240/E - Micro-cutting HT ribbon saw max 85 mm table 220 x 200 mm - 27172
Massive ribbed aluminium cast iron case (construction neither of steel tubes nor stamped sheets).
Massive ribbed aluminium cast iron case (construction neither of steel tubes nor stamped sheets).
Double-bearing aluminum chickens. Stable table with flat,droaning worktop, groove for tab cuts. (reclining tray at 45 degrees for tab cuts). Band guide mounted on 3 bearings and adjustable height. Possible setting for blades of different widths. Optibelt 220 Volts silent drive with notched belt. (high quality and enduring). Electronically adjustable speed for extremely clean cuts (not requiring later finishing). A clear picture shows the diets for virtually all materials. The ideal band size (5 x 0.4 mm) allows for low-ray rounded cuts.
Technical data:
230 V. Adjustable band speed from 180 to 330 m/min (feedback effect). Passage between the blade and the 150 mm pan. Passage in height maximum 80 mm. Work table 200 x 200 mm (steerable from 0 to 45 degrees). Weight About 8 kg. A 1065 x 5 x 0.4 mm (14-tooth) saw ribbon is part of the basic equipment.
The MBS 240/E has a suction hose outlet. For clean work. We recommend using our CW-matic compact workshop vacuum cleaner.
Separate Blade Guide
NO. 28,187
Standard saw ribbon
Soaked Swedish steel. With fine tooth (24 d). For steel and brass.
NO. 28, 174 1.065 x 5 x 0.4 mm
Similarly,
but with coarse tooth (14 d).
NO. 28,176 1.065 x 5 x 0.4 mm
Extra-thin (3.5 mm) saw ribbon for narrow spokes
Special-coated steel with coarse induction-soaked tooth (14 d). Particularly suitable for aluminum and plastics.
NO. 28,180 1.065 x 3.5 x 0.5 mm
Bimetal saw ribbon
Allied steel handler ribbon, the saw teeth are however in anti-wear HSS. Variable denture 10 - 14 d. Ideal for cutting all natural shades of steel, non-ferrous metals and stainless steel.
NO. 28, 172 1.065 x 6 x 0.6 mm
Cutting saw ribbon
Extremely thin (1.3 mm), for very tight curvature rays. Turns the MICRO MBS 240/E ribbon saw into a cutting saw. Special high-performance steel. Undulating and avoyed teeth (10 teeth per inch). For all types of wood, plastics and non-ferrous metals.
NO. 28, 182 1.065 x 1.3 x 0.44 mm
Diamond saw ribbon
For cutting stone, ceramics, glass or fiberglass. Only the correct cooling of the diamond ribbon ensures optimal cutting of glass or ceramics and allows a great longevity of the ribbon. We recommend doing this with a brush.
NO. 28, 186 1.065 x 3 x 0.3 mm
Hardened spring steel saw ribbon (without teeth)
For cutting foam, plastic, rubber, leather, paper and cardboard.
NO. 28, 184 1.065 x 6 x 0.4 mm
Reference: PRX-28172
Brand: Proxxon
Bi-Metal saw ribbon for MBS 240/E, 1067 x 6.0 x 6.0 mm Proxxon - 28172Ideal for cutting all natural shades of steel, non-ferrous metals and stainless steel.
Reference: PRX-28174
Brand: Proxxon
Saw ribbon, 24 thin teeth for steel and brass for MBS 240/E Proxxon - 28174Soaked Swedish steel. With fine tooth (24 d). For steel and brass.
Reference: PRX-28176
Brand: Proxxon
Saw ribbon, 14 large teeth for wood and synthetic materials for MBS 240/E Proxxon - 28178Soaked Swedish steel. With coarse tooth (14 d). For wood.
Reference: PRX-28180
Brand: Proxxon
Saw band, 14 very thin teeth for aluminum and synthetic materials for MBS 240/E Proxxon - 28180 Steel with a special coating, with coarse teeth hardened by induction (14 d). Particularly suitable for aluminum and plastics.
Reference: PRX-28182
Brand: Proxxon
Extremely narrow saw band (1.3mm), for tight spokes. For MBS 240/E Proxxon - 28182 Extremely thin (1.3 mm), for very tight radii of curvature.For all types of wood, plastics and non-ferrous metals.
Reference: PRX-28186
Brand: Proxxon
Diamond saw band for MBS 240/E Proxxon - 28186For cutting stone, ceramic, glass or fiberglass.
Reference: PRX-28187
Brand: Proxxon
Separate Blade Guide for MBS 240/E Proxxon - 28187
MBS 240/E - Micro-cutting HT ribbon saw max 85 mm table 220 x 200 mm - 27172
Massive ribbed aluminium cast iron case (construction neither of steel tubes nor stamped sheets).
