Engraving-model box with MICROMOT 60/E Proxxon

Engraving set for modellers with drill-milling machine MICROMOT 60/E

• For drilling, milling, sanding, polishing, brushing, cutting and engraving. For processing steel, precious metals, glass, ceramics, plastics and minerals.
• With safety voltage at low voltage. This also makes it suitable for working with coolant (polishing and cutting under liquid).
• For electronics DIYers, pattern makers, precision mechanics, goldsmiths, opticians, sculptors, pedicures, dentists, tool and mold making.

MICROMOT 60/E drill-milling machine:

Electronic stepless speed adjustment and high drive power at low speeds. Tool holder with MICROMOT steel collet (1 piece 1 - 1.5 - 2 - 2.4 - 3 and 3.2 mm).

Technical data:

Direct current 12 - 18 V. 40 W. 5,000 - 20,000/min.
Length of 220 mm.
Weight 230 g.

Comes with 34 industrial and dental-grade accessories:

1 diamond grinding wheel on shank, 1 fine milling cutter, 1 micro-drill 0.5 and 1 mm, 1 brass brush, 4 grinding wheels on corundum shank (cylinder, ball, wheel and cone), 1 elastic polisher, 2 grinding discs in corundum and 2 in silicon carbides, 20 cutting discs and 1 tool holder. In addition, 6 MICROMOT collet clamps from 1 to 3.2 mm. With 230 V mains transformer (12 V, 1 A). Comes in an elegant case made of sturdy plastic.

MICROMOT steel collets are hardened, which gives them a consistently high elasticity. They retain the necessary precision even after long use (incomparable to 4-slot unhardened collet or brass or aluminum collets). The triple lunge, which is much more difficult to achieve than a quadruple lunge, allows you to obtain a better seat. This is especially important for centering small diameter rods.

Remark:

The speed control of our 12 volt units only works with unstable power supplies (e.g. all MICROMOT transformers). Connection to stabilized power supplies is possible. Nevertheless, the devices then operate at maximum speeds (this also applies to battery operation).

Suitable accessories:

FS Foot Switch - NO. 28700
Work hands-free. For all devices with a European plug (class 2) and up to a maximum power of 500 W. Also suitable for bench fixtures. Fiberglass reinforced NYLON housing. 250 cm cord for 230 V mains. 50 cm of cable output. For 12 V devices, the switch can be connected to the transformer.