Heron Kit 2.40m Multiplex

The Heron de Multiplex is a high-performance glider with T-tailings and shutters. Its elegant wings fine profile and carrier allow him toexploitthesthes whatsods and if necessary, you can easily reassemble thanks to the perMAX brushless engine. HerON's in-flight performance is excellent in a variety of areas. Indeed, he will be at ease as much in the thermals as well as aerobatics or speed flight! The wing spar built in carbon/ALU uses innovative technology, which makes the wing extremely resistant.

VERSION Kit: Is delivered, the cell to be mounted with the accessories (guignols, rods, caps...) as well as the cone and propeller 12x6

Technical data:

Wingspan: 2400 mm
Length above all: 1100 mm
In-flight weight to. Pure glider: from 1300g
In-flight weight to. Electric: from 1500g
Number of lanes: from 5 lanes, 7 lanes recommended. The Multiplex Cockpit is ideal.
RC Functions: Depth, Direction, Wings, Volets, Butterfly Engine for Short Approaches and Landings!
Editing time: about 7 a.m.

Required items:

• 1x set set solius/Heron
• 1x Servo Heron kit with extension cable
• 1x battery 3S 11.1V 2200mAh with Multiplex socket
• 1x LiPo-enabled charger
• 1x set radio control/receiver 5 lanes or more
• Colle Zacki
• Canopy glue

Kit content:

• ELAPOR moulded fuselage elements
• Wings with CFK reinforced aluminum spar drowned in material
• Tail
• Glass support
• Fuselage nose
• Transparent glass and fiberglass reinforcements
• Small plastic parts and rod fittings needed to assemble
• 12x6 cone and blades
• Decoration board
• Detailed notice