Radio Pilot 6T Standard Truck Pack + Inverter + Charger + Nimh Battery + Servo reference T2M T3425C
T2M Accu 7.2v Nimh 3000mah Dean ref T1006300D: 3000mah Dean Plug Delivered individually
T2M Quick Charger 4+ Li-Po/Li-Fe/Ni-Mh ref T1269 Input voltage: 100-240 V AC Max. power: 16W Charging Current Range: 2A LiPo/LiFe Elements: 2-3S NiMH/NiCd Cells: 4-8S With Dean Charging Cord, Tamiya
T2M Servo 3.5KG/0.10S ref T224 Standard 3kg servo with plastic sprockets. Voltage: 6.0V – 7.4V Speed: 0.12s – 0.10s/60° Torque: 3.0kg – 3.5kg/cm Dimension: 40.8 x 20.1 x 38 mm Weight: 36g
T2M Radio Pilot 6T 2.4GHz ref T3425 Radio power supply 8 AA or NI-MH batteries Modulation FHSS Dual Rate (CH1, CH2,CH4) Channel reversers (CH1 to CH6) End of Runs (CH1 to CH6) Sub trim -120 to +120(CH1 to CH6) Operation Mode (1/2/3/4 Mode without Radio Disassembly) Mixes for planes, helicopters Mechanical trimmers on CH1 to CH4 Adjustable length aluminum handles 2 x 3-position switches for CH5 and CH6 Three-color LEDs indicate radio battery status Connections to the FUTABA / GRAUPNER/JR type receiver Charging jack on the side of the radio USB cord for connection to a PC for the SET UP of the radio. Free program to download from our website at the product page Three-position switches can be replaced with a two-position model or potentiometer Ring for attaching a strap (not included) Carrying handle Dimensions: 43 x 23 x 13mm Weight: 11 g
6-channel mini receiver 4.5V-6.5V BIND cord included
T2M Brushed Variator T4911/7003 Special for 1/10 cars Compatible with 540 or 550 12T Maxi carbon engine. 40A continuous power Power 180A at peak Resistance 0.0002 Engine limit 12T in 2S and 18T in 3S. Power supply 5 to 9 elements in nimh Power supply 2 to 3S in Lipo (11.1v) BEC 5v 2A Dimensions 46.5x34x28.5mm with fan Weight 65gr Dean Connector
Complete pack specially designed for Tamiya 1/14 trucks with MFU Kit.Pre-configured radio with set limit switches.This kit is ready to install in your truck.
