Car ESC Controller

Controller ESC 50A Waterproof-Can be used with motors brushless sensorless-Operation (forward with brake or market front and rear with brake)-4 start modes (punch) low to very powerful -Several protections: cut (low voltage, overheating, loss of radio and engine block)-Resistant to splashes and...

ESC 80A Waterproof Controller- Usable with engines brushless sensorless- Operation (forward with brake or forward and reverse with brake)- 4 starter modes (punch) ranging from low to very powerful - Several protections: cut-off (low voltage, overheating, radio losses and motor locking)- Splash...

Super flexible Silicone sensor cable for sensor brushless motor.Length: 300mm

Carson 70A drive waterproof for 1/10 coal engine.Compatible Li-Po 2S - 3S. Dean Tamiya adapter included.Small footprint for high power.Automatic gas stroke calibration, easy to use.Lipo cut, fail-safe, thermal protection.

Konect / Hobbywing 40A Drive waterproof for coal engine 1/10.Compatible Li-Po.Small footprint for high power.Automatic gas stroke calibration, easy to use.Lipo cut, Fail-safe, Thermal protection.

Konect / Hobbywing 40A Drive waterproof for coal engine 1/10 special Crawler and Boats.Compatible Li-Po.Small footprint for high power and engine brake.Automatic gas stroke calibration, easy to use.Lipo cut, Fail-safe, Thermal protection.

Set MFU MFC-03 Multifunction Tamiya for Euro Truck Reference 56523.For Tamiya truck.

Rush T2M programming board approved for the TETC (TAMIYA Euro Truck Challenge France)Suitable for Rush controller TETC version.

Controller 60A 1/10 and 1/12 XERUN-XR10-JUSTOCKIdeal for Stock competition category 1/10.

Controller 150A 1/8th competition.Current : 150A, burst 950AEntrance : 2-6S Lipo or 6-18 NiMH cellsResistance : 0.0002ΩBEC Output : 6V/7.2V, 6A / Max.15A (Switching mode)Compatible engine : Sensored motor / Sensorless brushlessEngine limit : 4S LiPo : KV ≤ 30006S LiPo: KV ≤ 2400 (Motor size:...

Carbon dimmer Quickrun WP 80A 1/10-1/8th crawler. -Power: 80A continuous/400A in Pointe  -Power supply: from 5 to 9 NIMH elements or from 2 to 3S LIPO  -BEC: 6V/7.4 V @ 3A (switch mode)

Compatible:ESC Platinum brushless series for aircraft, XeRun series and EzRun brushless series for cars, ESC brushless Seaking Pro series for boats.

Inverter 120A waterproof, ideal for Short races, buggy, truggy and monster 1/10.Waterproof, lipo compatible 2-4S, without delivered. -Special for cars 1/10 buggy, truggy, monster truck- Waterproof (water jet)- Power 120A continuous-Power 830 A peak-Resistance: 0.0011ohm-Engine limit in lipo 2s...

Inverter 150A waterproof, ideal for the buggy, truggy and monster 1/8. Comes with programming card.Waterproof, lipo compatible 4 and 6s, Prewired Dean, included programming card. -Special for cars 1/8 buggy, truggy, monster truck-Waterproof (water spraying)-Compatible motor sensorless-Power 150...

DIMMER-XERUN - 120A - SD - V2.1 -Power: 120 A continues / 760A tip  -Resistance: 0.0003ohm -Power supply: 4 to 9 NiMH cells or 2 to 3 S LIPO  -BEC: 5.75V / 3A  -Dimensions: 33-36-43 mm -Weight: 105 g-Compatible motor sensored and sensorless-Li - Po 2 S limit engine track 3.5 T and off-road 5.5...

Programming for Hobbywing converter card. Compatible with most of the ESC Brushless HobbyWing With this card you can adjust the brake engine power  the timing and other -Dimensions: 88 x 58 x 14-Weight 40 gr Supplied with connection cable and instructions in English

Rush T2M drive approved for the TETC (TAMIYA Euro Truck Challenge France)Compatible Li-Po.