DF-111 Four-Blade RTF DF Models RC Helicopter.Very simple to be drivenTake-off and landing of a One-touch on a button3 flight modes (beginner / intermediate / advanced)Altitude Lock6-axis gyroscopeBattery LiPo 7.4V 350mah, cable USB charging included

Volvo Pro ES 160E RC Excavator - T2M T8041/16 scale radio-controlled replica (standard scale of Tamiya RC trucks) of a Volvo construction excavator. Super powerful and with a metal bucket to easily load and unload sand, earth... the ideal complement to an RC dump truck.All the movements of a real...

It may be a 4WD, but The EVO30 captures the essence of the legendary RWD supercars of the 80s in all their glory.Street Car Evo30 Brushless RTR from FTX comes complete with battery and charger. This brushless version is equipped with a gyroscope.

Stunning 1/200 scale replica of the USS Missouri BB-63 wooden boat by OcCre.Manual with plan and detailed instructions.Reference: 16002Scale: 1/200Length: 1355 mmWidth: 178 mmHeight: 320 mmDifficulty: AdvancedNumber of pieces: 6,096Construction time: approx. 1,400h

Construction kit for a category F1H (A1) balsa free-flight glider with wings and empennages in structure. Ideal for learning about classic construction and Japanese paper and coated interfacing. CNC cut parts. Launched by hand or start with a bungee cord with a 50m towing line.Laser cutting kit....

DW Hobby ARF DLG Windrunner 1.20m laser cut kit. Balsa structure. Technical data: Wingspan: 1200mm Length: 915mm Flight weight: 280g

DW Hobby Moskito E43 360mm indoor kit. RTF version ready to fly. Technical data: Wingspan: 360mm Length: 350mm Flight weight: approx. 20g

Traxxas Mini XRT 108076-1 RTR – 3S Brushless Monster Truck, 55 mph, 4WD, Maxx Chassis, Gravix Tires, TQi TSM – Ready to Run with 3500 mAh LiPo & Charger

Traxxas X-Maxx Ultimate 8S VXL (Ref. 77097-4) – Ready-to-Run RC Monster Truck The X-Maxx Ultimate version combines this legendary robustness with more than €1,000 of aluminum options and high-performance parts, for maximum strength and formidable precision. The 2025 version pushes it even further...

UDI RC U98 PRO 4K 249 g mini drone, 3-axis gimbal, GPS, electronic stabilization (EIS) Take your adventures to the next level with the UDI RC Lightwing Mini 3 U98 Pro drone: a powerful 4K drone that folds to fit in your pocket, flies for over 30 minutes and captures cinematic 4K footage wherever...

FET - Proxxon Precision Cutting Table Circular Saw - 27070 For precision mechanics, model making, mold building, toy manufacturing, architecture, woodworking and interior design. For cutting wood, non-ferrous metals, plastics, plexiglass, fiberglass sheets, foam and many other materials.

TG 125/E - Proxxon 125 mm Disc Sander - 27060 Adjustable sanding speed from 250 - 800 m/min. For all types of wood, steel, non-ferrous metals, precious metals and plastic (also plexiglass and fiberglass).

TBM 220 - Proxxon 3-speed bench drill with 6 collets from 1.0 to 3.2 mm - 28128 Flat milled cast aluminum worktable, die-cast (220 x 120 mm) with parallel stop and graduation and threaded holes for fixing the KT 70 MICRO-coordinate table.

KG 80 - 2-45° Mitre Saw 4000 rpm Proxxon - 27160 The advantage for miter cuts: the adjustment is not made on the saw head but at the level of the round table (with the workpiece fixed)!

THERMOCUT 230/E - Proxxon hot wire cutter for polystyrene and thermoplastic film - 27080 For architectural models, for designers, decorators, artists (also for practical applied art projects) and for building prototypes. And of course for classic model making (trains, planes, boats).

MBS 240/E - Micro band saw, maximum cutting diameter 85 mm, table 220 x 200 mm - 27172 Solid casing made of ribbed cast aluminum (construction neither of steel tubes nor of stamped sheets).

STS 12/E - 12V 100W 2A Jigsaw with speed control, supplied with 2 Proxxon blades - 28534 Ideal for cutting wood, sheet metal and non-ferrous metal. With a powerful special DC motor.

NG 2/E - MICROMOT 2A 24VA transformer with Proxxon regulation - 28707 MICROMOT transformers. The safe power source for MICROMOT devices in low voltage.

NG 2/S - Proxxon MICROMOT 2A 24VA transformer without regulation - 28706 MICROMOT transformers. The safe power source for MICROMOT devices in low voltage.

NG 2/E - MICROMOT 2A 24VA transformer with Proxxon regulation - 28704 MICROMOT transformers. The safe power source for MICROMOT devices in low voltage.

Parkzone control linkages with clevis joints for the Extra 300, reference PKZ5122. A replacement part intended for the indicated compatible model, for the routine maintenance of your radio-controlled airplane.

Power HD DS1217MG digital servo for RC applications, with metal gears and dual-bearing.Compatible 6V or 7.4V, it combines a composite/aluminum housing with a compact design suited to the needs of radio-controlled modeling.

Iconx Castle Red Keep Game Of Thrones Metal EarthInstallation without glue or paint, a small flat clamp is sufficient.Kit on pre-cut metal plates.From steel sheets to high-quality 3D models!Simply extract the pieces and assemble them using the tabs and holes.Dimensions: 9.9 x 3.5 x 6.8 cm

JOYSWAY Focus II RTS monohull sailboat with MHD4S radio! - Length: 995mm - Width: 170mm - Total area: 52.73 dm² - Mast height: 1578mm - Total height: 2046mm - Weight: 3450g Content : - Molded plastic shells - 2.4 GHz MHD4S stick radio control (better range compared to the original Joysway radio)...

Funtek Stadium Truck STX G2 1/12 XL 4x4 RTR The FUNTEK STX G2 , successor to the STX, is a 1/12th scale XL monster truck designed to offer power, robustness, and accessibility. Ideal for off-road racing, it combines a full metal transmission, reliable electronics, and a highly aerodynamic body.

Airfix A50200 Space Shuttle Gift Set 1/144 scale. This set includes 99 parts, 7 decoration options, acrylic paints , glue , a brush , instructions and decals.

Airfix plastic model kit of the Westland Lynx AH-7 at 1/48 scale. Reference A09101A . Kit consisting of 233 parts with 3 markings , instructions, painting plan and decals included.

Zvezda SU-30SM Flanker-H 1/48 scale model aircraft. Plastic kit to assemble and paint, ref. 4808, comprising 392 parts with 2 pilot figures and decals for 3 versions. Assembled dimensions: length 470 mm, wingspan 306 mm.

Revell B-17F Memphis Belle 1:48 scale model kit. Reference 04297. Level 5 kit consisting of 107 parts, with detailed cockpit, moving propellers, detailed main landing gear and decals for the Memphis Belle version and another USAF version. Difficulty: 5 (1=easy, 2=intermediate, 3=difficult, 4=very...

Revell Citroën 2CV Charleston 1:24 scale model. Reference 07095. 126-piece kit, 160 mm long, with multi-part engine, movable hood, detailed interior and decorations for D, NL, I, GB and B license plates.

Heller plastic model kit of the Peterbilt 359 Wrecker at 1/43 scale. Reference 80794. Model length: 198 mm , width: 57 mm . Model kit to assemble and paint. Paints and glue not included.

Heller Kenworth K-123 Cabover Truck starter kit at 1/43 scale. Complete plastic model kit, reference 56793. Model kit to assemble and paint. Brushes, glue and paint included.

Heller Kenworth K-123 Cabover Truck starter kit at 1/43 scale. Complete plastic model kit, reference 56793. Model kit to assemble and paint. Brushes, glue and paint included.

Peterbilt 359 Wrecker 1/43 scale plastic model kit by Heller. Complete set on the theme of the American tow truck. Reference: 56794 . Model kit to assemble and paint. Brushes, glue and paint included.

Heller Alfa Romeo 6C 1750 Zagato starter kit, 1/24 scale. Reference 56715. Plastic model of an Italian civilian car presented as a complete set. Model kit to assemble and paint. Brushes, glue and paint included.