Motor, ESC and accessories

Compatible with most RC electric cars on a 1/10th scale type buggy, truggy or Monster Truck...

12-tooth motor pinion. For 1/8 scale electric buggy. For 5mm axle.

Steel engine gable.Comes with 3x3 headless screw

Type 550 brushed electric motor.Compatible with most 1/10th scale RC electric cars such as buggy, truggy or Monster Truck...Technical characteristics:Type: Brushed (brushed) 550Voltage: 4.8 - 9.6VPower supply: 4-8 Ni-Cd/Ni-MH or 2S Li-PoSize:Total Diameter: 36mmAxle Diameter: 3.2mm (3.175mm)Cage...

Steel engine gable.Comes with 3x3 headless screw

Typical coal-fired motor 550, 16T.Compatible with most RC electric cars on a 1/10th scale type buggy, truggy or Monster Truck...

17-tooth steel motor pinion. For 1/8 scale electric buggy. For 5mm axle.

Brushless Motor Kit for TRX-4M Traxxas - 6250You'll have up to 50% more speed, increased throughput torque and superior accuracy compared to traditional brush-based systems. Whether you want to wheelie your monster truck or navigate a technical crawler course with your custom High Trail, this...

1/8 weights, 3 points Alu + Clutch Spring Kit Hobbytech HTR-1920002

Coal electric motor type 540, 55T.Compatible with most rc electric cars at 1/10th scale type Crawler...

Brand: Racerstar  Name: BR1306 4000KV Motor KV: 4000Power: 48W Diameter of axis: M5 Engine dimensions (dia. x Long): Φ17.6 × 14.5 mm Weight: 11g Power supply (Lipo): 1-2 S

- New special brushless crawler motor with integrated ESC- Ultra quiet, torquey, linear and very flexible.- Waterproof Combo

Controller ESC 50A Waterproof-Can be used with motors brushless sensorless-Operation (forward with brake or market front and rear with brake)-4 start modes (punch) low to very powerful -Several protections: cut (low voltage, overheating, loss of radio and engine block)-Resistant to splashes and...

ESC 80A Waterproof Controller- Usable with engines brushless sensorless- Operation (forward with brake or forward and reverse with brake)- 4 starter modes (punch) ranging from low to very powerful - Several protections: cut-off (low voltage, overheating, radio losses and motor locking)- Splash...

Supplied with motor and propeller adapter.

Super flexible Silicone sensor cable for sensor brushless motor.Length: 300mm

Standard: N3: Hot N4: Medium Hot N5: Medium Cold N6: Cold Turbo: T5: Hot T6: Medium Heat (all seasons) T7: Medium Cold T8: Extra Cold

Standard: N3: Hot N4: Medium Hot N5: Medium Cold N6: Cold Turbo: T5: Hot T6: Medium Heat (all seasons) T7: Medium Cold T8: Extra Cold

Standard: N3: Hot N4: Medium Hot N5: Medium Cold N6: Cold Turbo: T5: Hot T6: Medium Heat (all seasons) T7: Medium Cold T8: Extra Cold

Standard: N3: Hot N4: Medium Hot N5: Medium Cold N6: Cold Turbo: T5: Hot T6: Medium Heat (all seasons) T7: Medium Cold T8: Extra Cold

Carson 70A drive waterproof for 1/10 coal engine.Compatible Li-Po 2S - 3S. Dean Tamiya adapter included.Small footprint for high power.Automatic gas stroke calibration, easy to use.Lipo cut, fail-safe, thermal protection.

Diameter 26mmBell 15 teeth with 2 bearings waterproof.

Electric coal motor type 550.Compatible with most RC electric cars in 1/10th scale type buggy, truggy or Monster Truck...Technical characteristics:Type: Brushed (coal) 550Voltage: 4.8 - 9.6VPower supply: 4-8 Ni-Cd/Ni-MH or 2S Li-PoSize:Total diameter: 36mmAxis diameter: 3.2mm (3.175mm)Cage...

Electric coal motor type 550.Compatible with most RC electric cars in 1/10th scale type buggy, truggy or Monster Truck...Technical characteristics:Type: Brushed (coal) 550Voltage: 4.8 - 9.6VPower supply: 4-8 Ni-Cd/Ni-MH or 2S Li-PoSize:Total diameter: 36mmAxis diameter: 3.2mm (3.175mm)Cage...

Coals 35T engine, spare the trademark DYNAMITE car. Voltage: 4.8 - 9.6V Cells: 4-8 ni-Cd/Ni-MH or Li - Po 2s Li - Po Diameter: 36mm Diameter shaft: 3.175 mm Length axis: 15.5 mm Length: 50mm

New Combo Konect G2 for 1/10th. This combo is ideal for converting to brushless any type of RC car on a scale of 1/10 in 2 or 4 wheel drive: track, buggy, drift, stadium, monster...Included in the box is a motor and a 60A ESC by Hobbywing.ESC 60A / 4600 kv 4-pole motor.

50Amp waterproof CONTROLLERKN-10BL50-WP- 2-3S LiPo / 4-9 NiMH cells- 50Amp continuous / 300Amp peak- Compatible with sensorless brushless motors- Suitable for: 1/10th Track and off-road- Dimensions: 48.5mm(L) * 38mm(W) * 32mm(H)-Grip DEAN1/10th BRUSHLESS SENSORLESS MOTORKN-3652-5400- 4 poles -...

Input voltage: 7.4V (2 Li - xx) / Ni-MhBEC: 5V 0.8amp leadOutput: 7A (output: DC 7A, 9 A max up to 10 sec.)Size: 10mm (L) x 7mm (l) x 2mm (H).Weight: 5g

Input voltage: 7.4V to 11.1V DC (2 - 3s Li - xx)BEC: 5V 1AmpOutput: 10A (output: continuous 10A, 13 A maximum up to 10 sec.)Size: 50mm (W) x 12mm (l) x 10mm (H).Weight: 10g

Input voltage: 7.4V to 11.1V DC (2 - 3s Li - xx)BEC: 5V 3AmpOutput: 10A (output: continuous 12A, 15 A maximum up to 10 sec.)Size: 24mm (L) x 19mm (l) x 6.5 mm (H).Weight: 11g

Engine Tazer 380 with cables for Electrix 1/18 of the model mark Dynamite for radio controlled vehicles. - Taille 380- Bobinage 25T- Voltage 4.8 à 9.6v- Diametre 27.7mm- Axe 2.3mm

Hobbywing Zerun sensored brushless motor series 2474SD 4-pole. Brushless motor 1/8-sensor to provide better performance and more flexibility. Full-sensored Mode.Turbo Timing technology.Bi-directional Adjustable Timing.Advanced Hall Sensing System. CNC machined aluminum engine cage  Sensor with...