Startup

Glowstart of power of the spark plug which can be connected to a battery of 2.5 to 20 Volts. This allows first do not burn the candle with a too high battery. There is no need in this case to a special battery for the controller and the lighting of the candle is done while implementing rotation...

For engine.21 3.5 cm2. Hex: 12mm.

• For 1/8 & 1/10th Scale Buggy and Track • Two 775 engines • Power supply 2 x 7.2V Ni-mh or 2 x Lipo 7.4V (or 1 Li-Po 14.8V or external 12V battery by modifying the connector). New mounting bracket for Li-Po batteries. Wired with 2 DEAN or Tamiya plugs in series.

Power Panel with built-in electric pump. Output current-stabilized 1.5 Volt to fuel the spark plug in the best conditions. 4 power sources for: boot from the spark plug (1.2 Volt) glowstart charger, direct feed of the candle (1.5 Volts), starter (12 Volt), electric pump (from 6 to 12 Volts)....

For starter bench Hobbytech Racing ref HTR-001Outer diameter: 71mmInner hole diameter: 20mmSpacing fixing holes: 35mm

Ideal kit for beginners who want to start a radio-controlled car with a combustion engine for the first time. All the wrench you need to start the engine is in the kit. All the different parts are specially adapted to work together. Ideal for all combustion engines of any size.

For engine .21 3.5 cm2.Hexagon: 12mm.Entrax fixing holes: 27mm

• For 1/8 & 1/10th Buggy and track• Two engines 775• Power supply 2 x 7.2V Ni-mh or 2 x Lipo 7.4V or 1 Li - Po 14.8V or 12V battery. -1 Jack dean for a battery-Cord series Dean for 2 batteries Ni-Mh / Li - Po-Cord to terminals 12V Gel battery.

Candle warmer with 1800mAh NiMH battery + 220V wall charger.

First engine the spark plug power glowstart with diodes, comes with battery 1800 mA and its charger 220 Volts. The glowstart is fitted with 2 LEDs for control power and correct operation of the battery and the engine spark plug. The body of the glowstart boasts an innovative ergonomics for a...

For Koswork KOS05201 starter bench Outer diameter: 75mm Inner hole diameter: 25mm Fixing hole center distance: 37mm

Glow glow with NiMH 2000mAh battery + wall charger 220V.

This thermal car starter kit is essential to start your engine. Contents of the kit: -1 x glow plug starter with rechargeable battery 1.2V 1800mah -1 x charger 250mA -1 x screwdriver -1 x screwdriver -1 x Socket 5.5mm/7mm/8mm/10mm/17mm -1 x mini socket 4mm/5mm/5.5mm/7mm -1 x 250ml pipette