Switches, UBec...

In addition, this switch has a built-in battery NiMh/NiCd or LiPo battery controller. You can check the remaining capacity of your battery. Has cut in Li - Po mode security to protect your battery.

Embedded electronic switch high voltage (40V) and intensity (10A), can be connected to an auxiliary channel of the receiver for supplying an electronic module of your choice controlled by the issuer as: lights, smoke, system release, navigation lights, Horn, Horn mist, heater spark plug, engine...

Ubec DW Hobby -Output: 5V / 3.5 A continuous-Entry: 7.2V - 21V (2 - 5s LiPo, NiMh 5-15)  -Consumption: 50mA-Dimensions: 25 x 47 x 11 mm -Weight: 12 g

In addition, this switch has a built-in battery NiMh/NiCd or LiPo battery controller. You can check the remaining capacity of your battery.

Small system BE-FOUND +. very handy to find your model. Connects to an auxiliary channel and fires at the request according to the programmed switch.Or is connected to the output "buzzer" on a map of flight. Size: 18 x 13 x 8 mmWeight: 2gPlugs on a mixed free track or series on a track used.

Signal servo inverter is connected to the output of the receiver to the servo in the form of a small extension and allows you to reverse the direction of operation of the servo.

- Output: 5 or 6V /3A continues (6A peak)- Admission: 5.5-26V (2-6S LiPo/5-18 Cells NiMH/NiCd)- Size: 43x17x7mm - Weight: 11g - Ripple: less than 50 mVp-p (entry 2A / 12V)

USB cable + USB socket for dimmer or BEC Castle creation