Various

To measure the rpm of the propellers and blades, from 2 to 9 blades and stores the values recorded Maximum 99999 RPM

Radiator with 1 Fan for engine type 540 - 1/10th ø36mm.

Size: 13 x 31 x 43 mmInput voltage: 0.5V - 4.50V by cell The low voltage alarm setting range: Off or 2.7V to 3.8V If the voltage falls below the set value, the buzzer will sound with a red LED. The preset value is 3.3V and can be adjusted by pressing the set button.

58 recorded car sounds Multiple lighting effects

With the GT-Power 2S/3S LiPo Battery Alarm, you will be informed when your battery is nearing the end of its useful life, making it easier to find your lost RC model. The alarm is equipped with a switch that allows you to select the number of cells in your LiPo, 2S or 3S battery.

Radiator with 1 fan for engine type 1/8th o44mm.Voltage of 5V to 7.2V fanFan dimension: 50x50x10mm

Radiator with 1 fan for motor type 540 - 1/10th ø36mm.Voltage of 5V to 7.2V fanFan dimension: 48x48x16mm

Voltage: 6V to 8VSocket: SpoutWeight: 13grDimensions: 30x30x10mm

Mini display of power running from 2.5 to 30V. Size: 31 × 12 × 9mm Supplied without connector. Color display delivered randomly.

Perfect for drone racer. Pads Led front or rear size: 10x20mm by PadPad led left + right + cord 15cm + 10 Prewired cm double-sidedPower 3s lipo 12V

Perfect for drone racer. Pads Led front or rear size: 10x20mm by PadPad led left + right + cord 15cm + 10 Prewired cm double-sidedPower 3s lipo 12V

Perfect for drone racer. Pads Led front or rear size: 10x20mm by PadPad led left + right + cord 15cm + 10 Prewired cm double-sidedPower 3s lipo 12V

2 spotlights powerful for airplane, helicopter, car or boat.

8 spotlights powerful for airplane, helicopter, car or boat.

8 LED with G.T. Power Control Board. * Supply voltage: 4V - 6V* Current: 30mA* Platinum size: 35 x 24 x 8mm* Led cable length: 600mm* Weight: 35 g* Size LED (diameter x length): 5x8mm Includes: * 1 x Platinum control* 2 x white LEDs fixed* 1 x green LED on fixed (nav)* 1 x red LED on fixed (nav)*...

Size: 12 x 25 x 40 mmInput voltage: 0.5V - 4.50V by cell The low voltage alarm setting range: Off or 2.7V to 3.8V If the voltage falls below the set value, the buzzer will sound with a red LED. The preset value is 3.3V and can be adjusted by pressing the set button.

GT Power's sound module lets you mimic the roar of a large engine on your RC model. This module has a memory with 58 different engine sounds .