Motor car

Compatible with most RC electric cars on a 1/10th scale type buggy, truggy or Monster Truck...

12-tooth motor pinion. For 1/8 scale electric buggy. For 5mm axle.

Steel engine gable.Comes with 3x3 headless screw

Type 550 brushed electric motor.Compatible with most 1/10th scale RC electric cars such as buggy, truggy or Monster Truck...Technical characteristics:Type: Brushed (brushed) 550Voltage: 4.8 - 9.6VPower supply: 4-8 Ni-Cd/Ni-MH or 2S Li-PoSize:Total Diameter: 36mmAxle Diameter: 3.2mm (3.175mm)Cage...

Steel engine gable.Comes with 3x3 headless screw

Typical coal-fired motor 550, 16T.Compatible with most RC electric cars on a 1/10th scale type buggy, truggy or Monster Truck...

17-tooth steel motor pinion. For 1/8 scale electric buggy. For 5mm axle.

Brushless Motor Kit for TRX-4M Traxxas - 6250You'll have up to 50% more speed, increased throughput torque and superior accuracy compared to traditional brush-based systems. Whether you want to wheelie your monster truck or navigate a technical crawler course with your custom High Trail, this...

1/8 weights, 3 points Alu + Clutch Spring Kit Hobbytech HTR-1920002

Coal electric motor type 540, 55T.Compatible with most rc electric cars at 1/10th scale type Crawler...

- New special brushless crawler motor with integrated ESC- Ultra quiet, torquey, linear and very flexible.- Waterproof Combo

Controller ESC 50A Waterproof-Can be used with motors brushless sensorless-Operation (forward with brake or market front and rear with brake)-4 start modes (punch) low to very powerful -Several protections: cut (low voltage, overheating, loss of radio and engine block)-Resistant to splashes and...

ESC 80A Waterproof Controller- Usable with engines brushless sensorless- Operation (forward with brake or forward and reverse with brake)- 4 starter modes (punch) ranging from low to very powerful - Several protections: cut-off (low voltage, overheating, radio losses and motor locking)- Splash...

Super flexible Silicone sensor cable for sensor brushless motor.Length: 300mm

Carson 70A drive waterproof for 1/10 coal engine.Compatible Li-Po 2S - 3S. Dean Tamiya adapter included.Small footprint for high power.Automatic gas stroke calibration, easy to use.Lipo cut, fail-safe, thermal protection.

Diameter 26mmBell 15 teeth with 2 bearings waterproof.

Electric coal motor type 550.Compatible with most RC electric cars in 1/10th scale type buggy, truggy or Monster Truck...Technical characteristics:Type: Brushed (coal) 550Voltage: 4.8 - 9.6VPower supply: 4-8 Ni-Cd/Ni-MH or 2S Li-PoSize:Total diameter: 36mmAxis diameter: 3.2mm (3.175mm)Cage...

Electric coal motor type 550.Compatible with most RC electric cars in 1/10th scale type buggy, truggy or Monster Truck...Technical characteristics:Type: Brushed (coal) 550Voltage: 4.8 - 9.6VPower supply: 4-8 Ni-Cd/Ni-MH or 2S Li-PoSize:Total diameter: 36mmAxis diameter: 3.2mm (3.175mm)Cage...

Coals 35T engine, spare the trademark DYNAMITE car. Voltage: 4.8 - 9.6V Cells: 4-8 ni-Cd/Ni-MH or Li - Po 2s Li - Po Diameter: 36mm Diameter shaft: 3.175 mm Length axis: 15.5 mm Length: 50mm

New Combo Konect G2 for 1/10th.  This combo is ideal for converting to brushless any type of RC car on a scale of 1/10 in 2 or 4 wheel drive: track, buggy, drift, stadium, monster...Included in the box is a motor and a 60A ESC by Hobbywing. ESC 60A / 2200 kv 4-pole motor.

New Combo Konect G2 for 1/10th.  This combo is ideal for converting to brushless any type of RC car on a scale of 1/10 in 2 or 4 wheel drive: track, buggy, drift, stadium, monster...Included in the box is a motor and a 60A ESC by Hobbywing. ESC 60A / 3400 kv 4-pole motor.

New Combo Konect G2 for 1/10th.  This combo is ideal for converting to brushless any type of RC car on a scale of 1/10 in 2 or 4 wheel drive: track, buggy, drift, stadium, monster...Included in the box is a motor and a 60A ESC by Hobbywing. ESC 60A / 3800 kv 4-pole motor.

New Combo Konect G2 for 1/10th. This combo is ideal for converting to brushless any type of RC car on a scale of 1/10 in 2 or 4 wheel drive: track, buggy, drift, stadium, monster...Included in the box is a motor and a 60A ESC by Hobbywing.ESC 60A / 4600 kv 4-pole motor.

New Combo Konect G2 for 1/10th. This combo is ideal for converting to brushless any type of RC car on a scale of 1/10 in 2 or 4 wheel drive: track, buggy, drift, stadium, monster...Included in the box is a motor and a 60A ESC by Hobbywing.ESC 60A / 5400 kv 4-pole motor.

50Amp waterproof CONTROLLERKN-10BL50-WP- 2-3S LiPo / 4-9 NiMH cells- 50Amp continuous / 300Amp peak- Compatible with sensorless brushless motors- Suitable for: 1/10th Track and off-road- Dimensions: 48.5mm(L) * 38mm(W) * 32mm(H)-Grip DEAN1/10th BRUSHLESS SENSORLESS MOTORKN-3652-5400- 4 poles -...

Engine Tazer 380 with cables for Electrix 1/18 of the model mark Dynamite for radio controlled vehicles. - Taille 380- Bobinage 25T- Voltage 4.8 à 9.6v- Diametre 27.7mm- Axe 2.3mm

Hobbywing Zerun sensored brushless motor series 2474SD 4-pole. Brushless motor 1/8-sensor to provide better performance and more flexibility. Full-sensored Mode.Turbo Timing technology.Bi-directional Adjustable Timing.Advanced Hall Sensing System. CNC machined aluminum engine cage  Sensor with...

11-tooth engine gable.For 1/8 electric TT. For 5mm axis.

Steel engine gable.Comes with 3x3 headless screw

Metal engine gable.Comes with 3x3 headless screwEach gable is marked with its number of teeth for easy identification.For 3mm diameter axis.

Steel engine gable.Comes with 3x3 headless screw

Steel engine gable.Comes with 3x3 headless screw

Steel engine gable.Comes with 3x3 headless screw

Steel engine gable.Comes with 3x3 headless screw

20-tooth engine gable.For 1/8 electric TT. For 5mm axis.

Steel engine gable.Comes with 3x3 headless screw

Steel engine gable.Comes with 3x3 headless screw

Traxxas TRX-4 engine TRX-3975R

Coal type electric motor 550, 20T.Compatible with most electric cars to the 1/10th scale RC type buggy, truggy and Monster Truck...

Konect / Hobbywing 40A Drive waterproof for coal engine 1/10.Compatible Li-Po.Small footprint for high power.Automatic gas stroke calibration, easy to use.Lipo cut, Fail-safe, Thermal protection.

Konect / Hobbywing 40A Drive waterproof for coal engine 1/10 special Crawler and Boats.Compatible Li-Po.Small footprint for high power and engine brake.Automatic gas stroke calibration, easy to use.Lipo cut, Fail-safe, Thermal protection.

Set MFU MFC-03 Multifunction Tamiya for Euro Truck Reference 56523.For Tamiya truck.

Ideal for crawler 1/10th 540 motor Removable

Motor sprocket 13 teeth.For 1/8 TT electric. For axis 5mm.

Engine sprocket 14 teeth.For 1/8 TT electric. For axis 5mm.

Motor sprocket 15 teeth.For 1/8 TT electric. For axis 5mm.