- New
0
Customer service
clear
Customer service
Our Contacts:
Mon-Fri: 9:00 am - 6:00 pm
Sat: 9:00 am - 4:00 pm
Sun: 9:00 am - 2:00 pm
8-100-9000-300
demo@demo.com27 Oak Street, Tenafly, US, 07670
Delivery:
Free delivery all orders of $120 or more of eligible items across any product category qualify
Payments:
Credit Card: Visa, MasterCard, Maestro, American Express
Return Policy:
You can return any item purchased within 16 days of the delivery date
Customer service
Epoxy Glue 5min 2x 100g Kavan
€14.90
Tax included
Two-component clear epoxy adhesive, fast setting 5 minutes – Kavan premium quality.
Packaging: 2 bottles of 100 g each (hardener + resin).
Order now and receive it...
between 11 Mar and 16 Mar with Colissimo Points de retrait €7.90
between 11 Mar and 16 Mar with Colissimo Domicile €8.90
between 11 Mar and 16 Mar with Livraison en relais Pickup €7.90
between 11 Mar and 16 Mar with Livraison à domicile Predict sur créneau horaire €8.90
between 11 Mar and 16 Mar with Lettre simple (sans assurance) €6.50
between 11 Mar and 16 Mar with Lettre suivi (sans assurance) €5.00
between 9 Mar and 16 Mar with Magasin Next Model RC / Univers Train Free!
Hurry up! Only
2
item(s) left in Stock!
Two-component, transparent, very fast curing and high-strength epoxy adhesive.
Resistant to fuels, solvents, and vibrations. Easily sandable once fully cured. Does not become brittle over time. Bonds wood, fiberglass, carbon composites, aluminum, copper, steel, brass, concrete, glass, hard plastics, expanded polystyrene, etc.
Properties :
Mixing ratio of components: 1:1 (volume and weight)
Initial color: transparent
Final color: transparent
Viscosity (after mixing): 5000~10000 mPa.s
Working time (before gelling): approx. 5 min (20–25 °C)
Handling of glued parts: after 15–20 min
Half resistance: after 10-15 minutes
Full resistance: after 2-3 hours
Complete hardening: 16-24 hours
Shear strength: 20 N/mm²
Temperature range of the bonded joint: -40 °C to +120 °C
Removing excess uncured glue: use a cloth or paper towel dampened with denatured alcohol.
Thinner: S6300 Epoxy Thinner (the use of thinners increases curing time and reduces the final strength of the joint – for a more fluid epoxy, use a lower viscosity laminating or finishing resin).
Suitable for use as fillers/fillers: Microbeads, talc, fine balsa or limestone powder, diatomaceous earth, chopped glass fibers, baby backfill.
Caution: Adding loads can reduce working time by up to 25% and, depending on the type and amount of load, decrease the joint's strength.
Compatible materials for bonding:
Softwood and hardwood, plywood, particleboard
Metals
Expanded polystyrene
Ceramics, porcelain
Laminates and fabrics made of fiberglass or carbon
Unsuitable materials:
Flexible and soft plastics (including EPP and EPO)
Polyethylene, Teflon
Storage: In a tightly sealed container, away from light, in a cool, dry place (10-25°C). Do not expose to temperatures below 10°C. Be careful not to confuse the resin and hardener caps: even a small amount of hardener can degrade a large quantity of resin.
Shelf life: Under good storage conditions, the guaranteed shelf life is 1 year while retaining the described properties. Experience shows that bisphenol A and epichlorohydrin-based epoxy resins retain their excellent properties for many years if stored correctly.
Important notes:
1. Temperature and mass of resin:
Hardening depends primarily on ambient temperature. When mixing large quantities (>20~30 g), the resin may harden more quickly. To extend working time, it is advisable to cool the epoxy (for example, in a water bath).
The heat generated by the resin-hardener reaction accumulates faster than the surface area available to dissipate it, resulting in accelerated hardening for large masses. For example, a 1 cm³ cube has a surface area of 6 cm² (ratio 6:1), while a 2 cm³ cube has a surface area of 24 cm² (ratio 3:1).
2. Thickening or yellowing:
Resins that are initially clear can thicken or lose their transparency due to cold, humidity, or weathering. Gently heating them in a water bath (60-70°C) for a few minutes is enough to restore the resin's clarity and original properties.
Safety: The product contains substances classified as hazardous according to Regulation (EC) No. 1272/2008.
Safety information
The product contains substances classified as hazardous under Regulation (EC) No 1272/2008.
Resin
Attention
Contains: bis- [4-(2,3-époxypropoxy)phényl] propane
May cause an allergic skin reaction.
Keep out of reach of children.
Avoid breathing the fumes.
Wear protective gloves / eye protection.
Dispose of the contents/container at a hazardous waste collection center.
Contains epoxy components. May cause an allergic reaction.
UFI: NW26-UESR-0H0Y-7WX8
The product contains substances classified as hazardous under Regulation (EC) No 1272/2008.
Hardener
Hazard
Contains: 1,3-bis [3-(diméthylamino)propyl] urea, 3-aminomethyl-3,5,5-trimethylcyclohexylamine
Causes severe skin burns and serious eye damage.
May cause an allergic skin reaction.
Causes serious eye damage.
Keep out of reach of children.
Do not breathe the fumes.
Wear protective gloves / protective clothing / eye protection.
IN CASE OF SKIN (or hair) CONTACT: Immediately remove all contaminated clothing. Rinse skin with water or take a shower.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor.
Keep under lock and key.
Dispose of the contents/container at a hazardous waste collection center.
UFI: KTGW-8MK5-F102-0TKH
KAV56.9963
Specific References
- EAN13
- 8596450061637
