0
Customer service
clear
Customer service
Our Contacts:
Mon-Fri: 9:00 am - 6:00 pm
Sat: 9:00 am - 4:00 pm
Sun: 9:00 am - 2:00 pm
8-100-9000-300
demo@demo.com27 Oak Street, Tenafly, US, 07670
Delivery:
Free delivery all orders of $120 or more of eligible items across any product category qualify
Payments:
Credit Card: Visa, MasterCard, Maestro, American Express
Return Policy:
You can return any item purchased within 16 days of the delivery date
Customer service
MICROMOT 60/EF - 12V milling drill, regul, with Proxxon chuck
€31.90
Tax included
MICROMOT 60/EF (replaces MICROMOT 50/EF) 12V 0.3 to 3.2 mm Proxxon - 28512
The new MICROMOT 60, the 4th generation of an EU-made tool that has proven itself millions of times.
Order now and receive it...
between 19 Mar and 24 Mar with Colissimo Points de retrait €7.90
between 19 Mar and 24 Mar with Colissimo Domicile €8.90
between 19 Mar and 24 Mar with DPD Livraison en relais Pickup €7.90
between 19 Mar and 24 Mar with DPD Livraison à domicile Predict €8.90
between today and 23 Mar with Magasin Next Model RC / Univers Train Free!
Hurry up! Only
1
item(s) left in Stock!
MICROMOT 60/EF Strawberry Drill
Particularly handy thanks to their 35 mm diameter, they also have a reduced weight (approximately 230 g), pleasant noise and flexible operation thanks to a balanced engine and the rectified axis mounted on ball bearings. The use of high-quality steel MICROMOT clamps (see description below) allows for an extremely concentric tightening of the smallest tool tails. There is no grazing or bumps of the tool.
The use of MICROMOT 60 devices requires a transformer. We recommend microMOT NG 2 transformers.
- 20mm collar attachment system allows use with the MB 200 vertical support and the UHZ universal support.
- Robust polyAMIDE case reinforced with fiberglass. With flexible component in the grip area.
- Electronic progressive adjustment of the feedback-effect rotation regime. For high drive power at low revs.
- To pierce, mill, sand, polish, brush, cut and burn. For the processing of steel, precious metals, glass, ceramics, plastic and minerals.
- With low voltage safety voltage. Suitable for working with cooling liquid (polishing and cutting under liquid).
- For electronics do-it-yourselfers, modellers, precision mechanics, goldsmiths, opticians, sculptors, pedicures, dentists, tool and mold manufacturing.
With fast tightening chuck between 0.3 and 3.2 mm. Advantageous especially when working with accessories of different diameters, e.g. with HSS drills. However can also be used with MICROMOT steel clamps. Various technical features and equipment as for the MICROMOT 60/E described above.
Note:
The speed control of our 12-volt units only works with unstabilized power supplies (e.g. all MICROMOT transformers). A connection to stabilized power supplies is possible. However, the devices then operate at maximum speeds (this also applies to battery power).
Technical data:
Continuous current 12 - 18 V.
40 W.
5,000 - 20,000/min.
Length of 220 mm.
Weight 230 g.
Appropriate accessories:
FS foot switch
Work with your hands free. For all devices with a European plug (class 2) and a power of up to 500 W max. Also suitable for set-up devices. A fibreglass-reinforced NYLON case. Cordon 250 cm for sector 230 V. 50 cm of cable out. For 12V devices, the switch can be plugged into the transformer.
NO. 28,700
MICROMOT electric extension cord
Three trillion inches. For 12-volt aircraft. Male and female sheets with polarity.
NO. 28,992
PRX-28512
Specific References
- EAN13
- 4006274285125
