WP/A - Proxxon Cordless Angle Polisher + Charger + Battery

WP/A Cordless Angle Polisher

The mobile version of our versatile corded device, for greater flexibility in polishing, cleaning, derusting and final polishing after varnishing.

With a wide range of accessories:
Rubber sanding disc with Velcro, medium polishing sponge, sheep's wool polishing disc, medium-hard felt polishing disc for ferrous and non-ferrous metals, 12 x 2000 grit sanding discs, 75 ml of polishing emulsion, and a microfiber cloth. The package also includes a 10.8 V Li-Ion Li/A2 battery and an LG/A fast battery charger.

• High-quality 10.8V Li-Ion battery with 2.6Ah for supreme efficiency.
• A single battery charge provides at least 30 minutes of use, even under heavy load. There's nothing else like it in this performance category!
• Transmission head made of cast aluminum. Main housing made of fiberglass-reinforced POLYAMIDE with a soft component at the handle.
• All tools are equipped with progressive electronic speed control and a special balanced DC motor: powerful, quiet and durable.

The WP/A cordless angle polisher with complete accessories comes in a practical and attractive, super-robust, high-quality PP plastic case. A sticker on the side allows for easy identification of the contents.

Technical data:

10.8 V DC.
Engine speed 1,100 - 2,800 rpm.
Length 305 mm.
Weight 950 g (battery included).

Accessories :

LG/A2 Fast Battery Charger
Charges the PROXXON Li-ion battery in one hour. With integrated temperature control. LED display: yellow = charging, green = charging complete.

Technical data:
Voltage 100 - 240 V, 50/60 Hz.
Output voltage 12.6 V, 2 A.
Weight 340 gr.

NO 29 880

Li-ion battery Li/A2
For powerful, long-lasting work with our new MICROMOT cordless tools. With integrated temperature control for safe operation.

Technical data:
Voltage 10.8 V.
Capacity 2.6 Ah.
Length 85 mm.
Weight 180 gr.

NO. 29896

Support platform made of foam material
With full self-gripping surface made of hard foam.

Ref: 29074 - Ø 30mm
Ref: 29098 - Ø 50mm

Felt polishing disc, medium hardness
For polishing metals (e.g. stainless steel, brass and copper).
Ø 50 mm.

Ref: 28666 - 2 pieces

Sheep's wool polishing wheel
Made from high-quality thick sheep's wool, for polishing scratch-resistant coatings.
Ø 50 mm.

Ref: 28664 - 2 pieces

Very thin sanding discs
Made from silicon carbide. For pre-polishing and final treatment of lacquers, to remove burrs and paint inclusions.
Ø 50 mm.

Ref: 28667 - 12 pieces - 400 grit
Ref: 28668 - 12 pieces - 1000 grit
Ref: 28670 - 12 pieces - 2000 grit

Wavy edge discs for angle and eccentric polishers
Made of silicon carbide. For treating lacquers in problematic, tight areas. Also for removing defects such as dust inclusions or paint runs, particularly in automotive paintwork (spot repair).
Ø 30 mm.

Ref: 29082 - 12 pieces - 1000 grit
Ref: 29084 - 12 pieces - 2500 grit

Professional set for polishing inclusions and sanding
With an 80 mm extension and a 30 mm foam pad (with quick Velcro attachment). For repairs and work in tight spaces, e.g., on motorcycles, rims, inside cars, and in engine compartments. The 80 mm extension is ideal for deep, problem areas. In addition to the extension and the 30 mm foam pad, the package includes 12 ring-shaped sanding discs in 1000 and 2500 grit, as well as a hard, medium, and soft conical polishing sponge.

Ref: 29070

Now available individually from the successful kit 29070 (Ø 30 mm): Professional polishing sponges
For applying polishing emulsion to lacquered and metallic surfaces followed by subsequent polishing. Ø 30 x 25 mm (conical).

Ref: 29076 - 2 pieces - hard (white)
Ref: 29077 - 2 pieces - medium (yellow)
Ref: 29078 - 2 pieces - soft (black)

Professional polishing sponges Ø 50 mm
For applying polishing emulsion to lacquered and metallic surfaces followed by subsequent polishing. Ø 50 x 25 mm (conical).

Ref: 29092 - 2 pieces - soft (black)
Ref: 29094 - 2 pieces - medium (yellow)
Ref: 29096 - 2 pieces - hard (white)

Proxxon 50mm Diameter Scrubbing Disc
Used to remove glue residue, leaves or other surface pollutants.
Ideal for removing glue residue from balancing weights on light alloy rims.
Ø 50mm.

Ref: 29092

Proxxon 50mm Diameter Abrasive Foam Pad
Self-adhesive type.
It adapts precisely to uneven surfaces thanks to its foam body.
High durability silicon carbide thanks to the support in a mesh structure (prevents clogging by dust).
Ideal for smart repair, fine sanding and touch-up of 3D printed parts.
Ø 50mm.

Ref: 28672 - 6 pieces - 1000 grit
Ref: 28674 - 6 pieces - 2000 grit