Welcome

Iconx Peacock Metal EarthInstallation without glue or paint, a small flat clamp is sufficient.Kit on pre-cut metal plates.From steel sheets to high-quality 3D models!Simply extract the pieces and assemble them using the tabs and holes.Dimensions: 24.1 x 30.5 cm

Iconx Pirate Ship Black Pearl Black Version Metal EarthInstallation without glue or paint, a small flat clamp is sufficient.Kit on pre-cut metal plates.From steel sheets to high-quality 3D models!Simply extract the pieces and assemble them using the tabs and holes.Dimensions: 14.6 x 4.4 x 11.4 cm

Iconx Silver Dragon Metal Earth Installation without glue or paint, a small flat clamp is sufficient. Kit on pre-cut metal plates.From steel sheets to high-quality 3D models!Simply extract the pieces and assemble them using the tabs and holes. Dimensions: 15.2 x 12.7 x 12.7 cm

Iconx Skimwing Avatar Metal EarthInstallation without glue or paint, a small flat clamp is sufficient.Kit on pre-cut metal plates.From steel sheets to high-quality 3D models!Simply extract the pieces and assemble them using the tabs and holes.Dimensions: 24.64 L x 20.83 W x 7.37 H cm

Iconx Tour Eifel Metal EarthInstallation without glue or paint, a small flat clamp is sufficient.Kit on pre-cut metal plates.From steel sheets to high-quality 3D models!Simply extract the pieces and assemble them using the tabs and holes.Dimensions: 15 x 5 x 5 cm

Imperial AT-ST Star Wars Metal EarthInstallation without glue or paint, a small flat clamp is sufficient.Kit on pre-cut metal plates.From steel sheets to high-quality 3D models!Simply extract the pieces and assemble them using the tabs and holes.Size: 4.5 x 6.8 x 8.1 cm

Imperial Star Destroyer Star Wars Metal EarthInstallation without glue or paint, a small flat clamp is sufficient.Kit on pre-cut metal plates.From steel sheets to high-quality 3D models!Simply extract the pieces and assemble them using the tabs and holes.Dimensions: 10.4 x 5.6 x 5.9 cm

The Destroyer stellar class - 1 (interstellar cruiser in the movies) is the basestar to the Galactic Empire in the Star Wars movies. COlle and paints and brushes included.

T-fitting for hose fuel transparent silicone for engine methanol / glow.

Kyosho 1/8 thermal buggy MP9 inferno TKI4 RTR. Ref. 33014Readyset version mounted with 3.5cc engine KE21R2.4ghz radio KT-331PChassis based on the competition version of the Kyosho MP9 TKI 4.The Readyset included:Fully assembled in a factory equipped with a reception unit, servos and its rods.Body...

Off-road buggy 1/8 brushless Kyosho inferno MP9e EVO.New RTR version Mounted with 2300kV brushless motor, waterproof dimmer and 2.4GHz radioThis chassis based on the competition version of the MP9E.

KYOSHO INFERNO NEO 3.0 33012T5Here is the new Kyosho inferno Neo 3.0 Buggy combining performance and accessibility for beginners in thermals. The Kyosho Inferno 3.0 1/8 petrol is available in RTR mounted version with the new KE21SP petrol engine, new Perfex KS5071-09MW metal gear servos, 2.4ghz...

Kyosho 34118T2 – Brushless RC Buggy 1/8 4WD Inferno Neo 4.0 VE The Kyosho 34118T2 is a 1/8 scale ready-to-run (RTR) RC buggy on a 4WD chassis. Equipped with a brushless motor and brushless ESC for optimal performance. It also includes a 2.4GHz KT-231P+ receiver with built-in gyro for increased...

Kyosho Truggy 1/8th inferno Neo ST 3.0 with thermal engine. 33016BComes RTR mounted with 4.1cc KE25SP engine and 2.4ghz radio.

Film shrink polyester of high technology. Width 60cm. Delivered in 2 m roll.

Film shrink polyester of high technology. Width 60cm. Delivered in 2 m roll.

Film shrink polyester of high technology. Width 60cm. Delivered in 2 m roll.

Film shrink polyester of high technology. Width 60cm. Delivered in 2 m roll.

Film shrink polyester of high technology. Width 60cm. Delivered in 2 m roll.

Film shrink polyester of high technology. Width 60cm. Delivered in 2 m roll.

Film shrink polyester of high technology. Width 60cm. Delivered in 2 m roll.

Film shrink polyester of high technology. Width 60cm. Delivered in 2 m roll.

Inverter 120A waterproof, ideal for Short races, buggy, truggy and monster 1/10.Waterproof, lipo compatible 2-4S, without delivered. -Special for cars 1/10 buggy, truggy, monster truck- Waterproof (water jet)- Power 120A continuous-Power 830 A peak-Resistance: 0.0011ohm-Engine limit in lipo 2s...

Inverter 150A waterproof, ideal for the buggy, truggy and monster 1/8. Comes with programming card.Waterproof, lipo compatible 4 and 6s, Prewired Dean, included programming card. -Special for cars 1/8 buggy, truggy, monster truck-Waterproof (water spraying)-Compatible motor sensorless-Power 150...

Controller DYS multicopters 40 Amp ESC without spout with firmware SimonK.

DIMMER-XERUN - 120A - SD - V2.1 -Power: 120 A continues / 760A tip  -Resistance: 0.0003ohm -Power supply: 4 to 9 NiMH cells or 2 to 3 S LIPO  -BEC: 5.75V / 3A  -Dimensions: 33-36-43 mm -Weight: 105 g-Compatible motor sensored and sensorless-Li - Po 2 S limit engine track 3.5 T and off-road 5.5...

Difficulty: 1 (1=easy, 2=intermediate, 3=difficult, 4=very difficult). 49 items.For children from 6 years old.

Difficulty: 1 (1=easy, 2=intermediate, 3=difficult, 4=very difficult). 44 items.For children from 6 years old.

Jeep Willys US 1/4 your Truck & Trailer 1/72 Heller + glues and paints Model to climb and paint. Glue brushes and paint included. Model dimensions: 8.5 x 2.7 cm55 pieces

Model aircraft Jester's A-4 Skyhawk Top Gun at scale 1:72 of the brand AirFix reference A00501.Difficulty: 2 (1-easy, 2-intermediate, 3-difficult, 4-very difficult).Length: 163Width: 114116 pieces

Here is a very nice flying replica of the F-16 Jet Fighter of FMS. Equipped with a turbine of 70mm associated with the 2860-1850kv Brushless motor, this jet will offer you a quick and pleasant flight. The F - 16 Fighter is also equipped with origin of a Electric gear train with depreciation.PNP...

Difficulty: 1 (easy, 2-intermediate, 3-difficult, 4-very difficult). 24 pieces.For children from 5 years old.

Here is a very nice flying replica of the F/A-18F Super Hornet 70mm of Roc Hobby. Equipped with a turbine of 70mm associated with the 2860-1850kv Brushless motor, this jet will offer you a quick and pleasant flight. The F - 16 Fighter is also equipped with origin of a Electric gear train with...

Small plane elastic to launch engine Balsa. Wingspan: 340mm

The perfect accessory for cleaning RC cars. Combining power and practicality, our air blower promises efficient and gentle cleaning.

Famous Latin sailing boat, from the chebec of Berber pirates. Equipped with 14 medium-calibre guns and 6 colubrines for close-range clashes, the Chebec was also used by the Spanish for their coastal defence and to fight Algerian pirates on equal terms.Code: 1421Scale: 1:100Length: 40...

Cable length: 15cm

Kavan polyester sticky heat shrink film. Width 64cm. Supplied in 2m rolls.

Kavan polyester sticky heat shrink film. Width 64cm. Supplied in 2m rolls.

Kawasaki Ninja H2R Motorcycle Premium Series Metal EarthInstallation without glue or paint, a small flat clamp is sufficient.Kit on pre-cut metal plates.From steel sheets to high-quality 3D models!Simply extract the pieces and assemble them using the tabs and holes.Size: 12.3 x 4.5 x 7.7 cm

Kawasaki ZX-10R motorcycle model, 1/9 scale - MT-007 Dimensions: 232 x 133 x 96 mm Manufacturer: Meng Scale: 1/9

Key flat Multi - nuts & tires not reverse o3.0mm - 4.0 mm - 5.0 mm - 5.5 mm - 7.0 mm - 8.0 mm AM190049 Arrowmax.

Couleur acrylique à base d'eau de marque MIG Jimenez AMMO. Peinture de haute qualité pour pinceaux et aérographe. Pot de 17mL

Chrome ABS door handles.4 different types. Scale 1/10

Storage box for small tools and for mounting on your 4 x 4 crawler KB48438 Killer Body.Finished in chrome ABS box. Height: 75mm Width: 46mm Length: 70mm

This is FMS's new trainer, the Kingfisher, with a wingspan of 1400 mm. Large wheels type "tundra" of origin, floats and skis are included!- Span: 1400mm- Length: 915mm- Flight weight: 1400g

When general George Washington took command of the army, he realized he did not have a capable to compete with the powerful British Navy fleet. Washington bought the schooner Hannah, first ship sponsored by the Continental Army. Code: 1355Scale: 1/300Boat length: 9.5 cm Pre-cut pieces to the...