Welcome

MUC-Off cleaner 1 L MUC904-CT This liquid will help you not only clean your Rc car of mud and dirt, but it also allows you to make your car shine again after washing. Anticorrosive liquid that does harm to painting or anodizing or joints. Biodegradable, safe for the environment or the user.

Coarse cleaning discs, by 6 pieces for LHW Proxxon - 28553Abrasive non-woven, used for cleaning, painting, removal of rust and scale from metal surfaces.For the preparation of welding points.Ø 50mm.

Diameter 26mmBell 15 teeth with 2 bearings waterproof.

Electric coal motor type 550.Compatible with most RC electric cars in 1/10th scale type buggy, truggy or Monster Truck...Technical characteristics:Type: Brushed (coal) 550Voltage: 4.8 - 9.6VPower supply: 4-8 Ni-Cd/Ni-MH or 2S Li-PoSize:Total diameter: 36mmAxis diameter: 3.2mm (3.175mm)Cage...

Electric coal motor type 550.Compatible with most RC electric cars in 1/10th scale type buggy, truggy or Monster Truck...Technical characteristics:Type: Brushed (coal) 550Voltage: 4.8 - 9.6VPower supply: 4-8 Ni-Cd/Ni-MH or 2S Li-PoSize:Total diameter: 36mmAxis diameter: 3.2mm (3.175mm)Cage...

Coals 35T engine, spare the trademark DYNAMITE car. Voltage: 4.8 - 9.6V Cells: 4-8 ni-Cd/Ni-MH or Li - Po 2s Li - Po Diameter: 36mm Diameter shaft: 3.175 mm Length axis: 15.5 mm Length: 50mm

Cockpit model F-104G Starfighter at italeri's 1/12 scale reference 2991.Dimensions: 14.7cm/9.0cmDifficulty: 4 (1-easy, 2-intermediate, 3-difficult, 4-very-difficult, 5-expert).

Hogwarts Express Train Colorful with rails Harry Potter Metal EarthInstallation without glue or paint, a small flat clamp is sufficient.Kit on pre-cut metal plates.From steel sheets to high-quality 3D models!Simply extract the pieces and assemble them using the tabs and holes.Dimensions:...

Brush in synthetic fibers Humbrol Color. Perfectly suitable for all types of paint, but is particularly effective when used with acrylic paint. For acrylic or enamel paint.

Brush in synthetic fibers Humbrol Color. Perfectly suitable for all types of paint, but is particularly effective when used with acrylic paint. For acrylic or enamel paint.

Brush in synthetic fibers Humbrol Color. Perfectly suitable for all types of paint, but is particularly effective when used with acrylic paint. For acrylic or enamel paint.

Brush in synthetic fibers Humbrol Color. Perfectly suitable for all types of paint, but is particularly effective when used with acrylic paint. For acrylic or enamel paint.

Brush in synthetic fibers Humbrol Color. Perfectly suitable for all types of paint, but is particularly effective when used with acrylic paint. For acrylic or enamel paint.

Model to build and paint.Length: 180mmWidth: 72mmManufacturer: HasegawaScale: 1/24

Difficulty: 5 (1-easy, 2-intermediate, 3-difficult, 4-very-difficult, 5-expert).Dimensions: 181 mmNumber of coins: 173

Difficulty: 2 (enthusiast) A assemble yourself,. without the use of glue. Size: 27 x 16 x 13 cmNumber of rooms: 154

New Combo Konect G2 for 1/10th.  This combo is ideal for converting to brushless any type of RC car on a scale of 1/10 in 2 or 4 wheel drive: track, buggy, drift, stadium, monster...Included in the box is a motor and a 60A ESC by Hobbywing. ESC 60A / 2200 kv 4-pole motor.

New Combo Konect G2 for 1/10th.  This combo is ideal for converting to brushless any type of RC car on a scale of 1/10 in 2 or 4 wheel drive: track, buggy, drift, stadium, monster...Included in the box is a motor and a 60A ESC by Hobbywing. ESC 60A / 3400 kv 4-pole motor.

New Combo Konect G2 for 1/10th.  This combo is ideal for converting to brushless any type of RC car on a scale of 1/10 in 2 or 4 wheel drive: track, buggy, drift, stadium, monster...Included in the box is a motor and a 60A ESC by Hobbywing. ESC 60A / 3800 kv 4-pole motor.

New Combo Konect G2 for 1/10th. This combo is ideal for converting to brushless any type of RC car on a scale of 1/10 in 2 or 4 wheel drive: track, buggy, drift, stadium, monster...Included in the box is a motor and a 60A ESC by Hobbywing.ESC 60A / 4600 kv 4-pole motor.

New Combo Konect G2 for 1/10th. This combo is ideal for converting to brushless any type of RC car on a scale of 1/10 in 2 or 4 wheel drive: track, buggy, drift, stadium, monster...Included in the box is a motor and a 60A ESC by Hobbywing.ESC 60A / 5400 kv 4-pole motor.

50Amp waterproof CONTROLLERKN-10BL50-WP- 2-3S LiPo / 4-9 NiMH cells- 50Amp continuous / 300Amp peak- Compatible with sensorless brushless motors- Suitable for: 1/10th Track and off-road- Dimensions: 48.5mm(L) * 38mm(W) * 32mm(H)-Grip DEAN1/10th BRUSHLESS SENSORLESS MOTORKN-3652-5400- 4 poles -...

The ROGUE TERRA is the new Monster truck from HOBBYTECH, now in a Brushless version. A unique 4-wheel drive chassis, for driving on all terrains and in all weather. Konect 2200kV brushless motor with a radiator and fan to maximize reliability. Comes with a waterproof Konect motor. Complete RTR...

The ROGUE BUGGY V2 is HOBBYTECH's new brushless buggy. It features a brand-new 4-wheel drive chassis, allowing it to handle all terrains and weather conditions. Equipped with a 2200kv Konect brushless motor and a heatsink/fan for maximum reliability. Supplied with a Konect waterproof motor....

Pair of soft leatherette memory foam earbuds for headphones.Fits most helmets.

Complete assortment polishing discs for SP/E Proxxon - 28312Assortment of polishers.

Complete Differential (Front or Rear) for Funtek SBX Car - FTK-21108

Complete engraving set with GG12 in 12V and test glass delivered in Proxxon box - 28635The perfect complete set for beginners with the proven GG 12 engraver!

Complete original shock absorber kit Red (x4) for Funtek SBX car - FTK-21131

Complete polishing set, 10 Proxxon pieces - 28285

The TRX-4m hardware kit includes all hardware used on the TRX-4m ™ Ford ® Bronco and Land Rover ® Defender ® organized in a plastic storage container.

Shock absorbers full compatible LaTrax nipple 1/18. Delivered by 2 with vial of oil and kneecaps.

Complete hardware kit for Funtek STX.

Original wheels for Pirate Booster Tracker Dune Ripper Shaker Mamba...Delivered by 2.

Concorde Air France 1/125 Heller Model to climb and paint. Paint and glue not included. Model dimensions: 49.4 x 20.8 cm85 parts

Concorde Air France 1/125 HellerModel to assemble and paint. Brushes glue and paint included.Model dimensions : 49.4 x 20.8 cm85 pieces

Concorde Air France 1/72 HellerModel to mount and paint. Glue brushes and paint included.Model dimensions: 865 x 355 mm151 pieces

Puzzle of the Concorde brand Heller, reference 20469Model dimensions: 68 x 47 cm1500 pieces

With opening of cooling.