Welcome

New mid-size engine for the Stampede 4X4 BL-2s Traxxas! Comes with TQ 2.4GHz flywheel radio, brushless motor, waterproof BL-2S inverter, steering servo (High Torque).Technical characteristics:- Transmission 4 Drive wheels- Traxxas Radio TQ- Waterproof BL-2S dimmer- 2S 3300kv brushless motor-...

The Stampede 4X4 VXL is back, with increased size and power!Boasting impressive torque from the Velineon 540XL engine, the Stampede overcomes the toughest obstacles while reaching a top speed of 95 km/h.Technical characteristics:4WD transmission2400Kv 540XL Brushless MotorElectronic Dimmer...

Rotating solar display for Metal Earth models, miniatures, 3D puzzleRotating solar base.Diameter 8.5cm

Model to be built with laser-cut parts, for great ease of assembly. The box also contains the plastic molded hood and the entire elastic propulsion system, as well as the covering paper.Wingspan: 760mm

Clear nitrocellulose coating for the protection metal parts and the shrinking covering papers on small models and miniature models.Brush, roller or spray application.Packaging: 100ml canister.

Clear nitrocellulose coating for the protection metal parts and the shrinking covering papers on small models and miniature models.Brush, roller or spray application.Packaging: 250ml canister.

Star Wars R2-D2 & C-3PO Box Set Metal EarthInstallation without glue or paint, a small flat clamp is sufficient.Kit on pre-cut metal plates.From steel sheets to high-quality 3D models!Simply extract the pieces and assemble them using the tabs and holes.Size: 10.8 x 6 x 12.3 cm

Self-assembly required, no glue needed. Model dimensions: 26 x 22 x 15.5 cm Number of pieces: 400

Model to build and paint.Manufacturer: MPCScale: 1/32Length: 19cm

Model to build and paint.Manufacturer: MPCScale: 1/72Length: 45.7cmRooms: 122

Model to build and paint.Manufacturer: MPCScale: 1/64Length: 20.3cm

Model to build and paint.Manufacturer: MPCScale: 1/144Length: 17.8cm

Model to build and paint.Length: 20.3cmWidth: Manufacturer: AMTScale: 1/144

Model to build and paint.Manufacturer: MPCScale: 1/100Length: 20.3cm

Model to build and paint.Length: 33cmWidth: Manufacturer: AMTScale: 1/32

For starter bench Hobbytech Racing ref HTR-001Outer diameter: 71mmInner hole diameter: 20mmSpacing fixing holes: 35mm

Power: 6, 5Kg.cmSpeed: 0, 17 sec / 60 ° Dimensions: 39x20x36mm Weight: 40g

Difficulty: 4 (1=easy, 2=intermediate, 3=difficult, 4=very difficult).Part Number: 149Length: 275mm

Difficulty: 5 (1=easy, 2=intermediate, 3=difficult, 4=very difficult). Part number: 163 Width: 3.9 cm Length: 28.4 cm Height: 6.4 cm

Model to be built with laser-cut parts, for great ease of assembly. The box also contains the plastic molded hood and the entire elastic propulsion system, as well as the covering paper.Wingspan: 457mm

Acrylic colour from the ATOM range of AMMO - MIG Jimenez. High quality paint for brushes and airbrush. 20mL jar

Steel AR Gimbals (x2) Pirate Buster T2M - T4965/80

Super Cut sing blade for steel, fine teeth (No.3: 41 teeth by 25mm), 12 Proxxon pieces - 28113

Super Cut sing blade for steel, medium tooth (No.5: 36 teeth by 25mm), 12 Proxxon pieces - 28112

Pirate Buster T2M Steel Gimbal Nuts (x4) - T4965/78

Comes in pairs.

Original steering servo for car T2M Pirate Booster, Dune, Ripper, Tracker, Mamba (new generation with 3 wires)...

Model vehicle Steyr RSO/01 and German soldiers in scale 1/35 of Italeri reference 6549.Dimensions: 126 mmDifficulty: 3 (1=easy, 2=intermediate, 3=difficult, 4=very difficult, 5=expert).

Stick -06 580mm laser cutout kit.Structure in balsa.Technical data:Wingspan - 580mmLength - 460mmWeight in flight order - 110g

Stick -06 580mm laser cutout kit.Structure in balsa.Technical data:Wingspan - 580mmLength - 460mmWeight in flight order - 110g

Large area sanding stick.1 piece.3 different grains: 320/600/4000MIG Jimenez AMMO brand sanding solutions.

ARF laser cut-out kit Stick-14 3D 1.40m de DW Hobby.Structure in balsa.Technical data:Wingspan: 1400mmLength: 1187mmIn-flight weight: 1.5 to 1.6 kg

ARF PNP laser cutting kit Stick-14 3D 1.40m de DW Hobby.Structure in balsa.Technical data:Wingspan: 1400mmLength: 1187mmIn-flight weight: 1.5 to 1.6 kg

Sticker for bodywork MD Production Bugatti EB 110 sheet. Pre-cut.

Perforated decorative Board. For Crawler 1/10

With the FTX Stinger, have fun rushing or drifting! With its brushless motorization, Li-Po battery, LED, metal pinion servo, gyroscope, anti-roll bars, Drift and Track wheels, the Stinger has a ton thunder equipment!The Stinger FTX comes complete and 99% assembled out of the box.

T2M Stingray Fun2Dive Submarine - T617Superb reproduction of a radio-controlled ocean exploration model. It is piloted with a two-way radio control allowing it to move in all directions (forward/backward, left/right, diving). Two buttons allow you to control the dive and ascent.

Scale: 1/32Compatible: ARC Scalextric

High Performance AircraftFly up to 100 mReady to fly in no timeFreewheel propeller for longer flights with rubber motorAluminum foil covered wing with spring steel wire frameMade in GermanyAge: 8 years and upSize: 53 x 50 cm

Metal tungsten carbide grater conical shape, 8 x 12 mm Proxxon - 29062

Metal tungsten-shaped tungsten carbide grater, 4 x 19 mm Proxxon - 29064

Enamel STREAKING paint to create a streaky effect. 35mL jar.

Enamel STREAKING paint to create a streaky effect. 35mL jar.

Enamel STREAKING paint to create a streaky effect. 35mL jar.