DF-111 Four-Blade RTF DF Models RC Helicopter.Very simple to be drivenTake-off and landing of a One-touch on a button3 flight modes (beginner / intermediate / advanced)Altitude Lock6-axis gyroscopeBattery LiPo 7.4V 350mah, cable USB charging included

Volvo Pro ES 160E RC Excavator - T2M T8041/16 scale radio-controlled replica (standard scale of Tamiya RC trucks) of a Volvo construction excavator. Super powerful and with a metal bucket to easily load and unload sand, earth... the ideal complement to an RC dump truck.All the movements of a real...

It may be a 4WD, but The EVO30 captures the essence of the legendary RWD supercars of the 80s in all their glory.Street Car Evo30 Brushless RTR from FTX comes complete with battery and charger. This brushless version is equipped with a gyroscope.

Stunning 1/200 scale replica of the USS Missouri BB-63 wooden boat by OcCre.Manual with plan and detailed instructions.Reference: 16002Scale: 1/200Length: 1355 mmWidth: 178 mmHeight: 320 mmDifficulty: AdvancedNumber of pieces: 6,096Construction time: approx. 1,400h

Construction kit for a category F1H (A1) balsa free-flight glider with wings and empennages in structure. Ideal for learning about classic construction and Japanese paper and coated interfacing. CNC cut parts. Launched by hand or start with a bungee cord with a 50m towing line.Laser cutting kit....

DW Hobby ARF DLG Windrunner 1.20m laser cut kit. Balsa structure. Technical data: Wingspan: 1200mm Length: 915mm Flight weight: 280g

DW Hobby Moskito E43 360mm indoor kit. RTF version ready to fly. Technical data: Wingspan: 360mm Length: 350mm Flight weight: approx. 20g

Traxxas Mini XRT 108076-1 RTR – 3S Brushless Monster Truck, 55 mph, 4WD, Maxx Chassis, Gravix Tires, TQi TSM – Ready to Run with 3500 mAh LiPo & Charger

Traxxas X-Maxx Ultimate 8S VXL (Ref. 77097-4) – Ready-to-Run RC Monster Truck The X-Maxx Ultimate version combines this legendary robustness with more than €1,000 of aluminum options and high-performance parts, for maximum strength and formidable precision. The 2025 version pushes it even further...

UDI RC U98 PRO 4K 249 g mini drone, 3-axis gimbal, GPS, electronic stabilization (EIS) Take your adventures to the next level with the UDI RC Lightwing Mini 3 U98 Pro drone: a powerful 4K drone that folds to fit in your pocket, flies for over 30 minutes and captures cinematic 4K footage wherever...

FET - Proxxon Precision Cutting Table Circular Saw - 27070 For precision mechanics, model making, mold building, toy manufacturing, architecture, woodworking and interior design. For cutting wood, non-ferrous metals, plastics, plexiglass, fiberglass sheets, foam and many other materials.

TG 125/E - Proxxon 125 mm Disc Sander - 27060 Adjustable sanding speed from 250 - 800 m/min. For all types of wood, steel, non-ferrous metals, precious metals and plastic (also plexiglass and fiberglass).

TBM 220 - Proxxon 3-speed bench drill with 6 collets from 1.0 to 3.2 mm - 28128 Flat milled cast aluminum worktable, die-cast (220 x 120 mm) with parallel stop and graduation and threaded holes for fixing the KT 70 MICRO-coordinate table.

KG 80 - 2-45° Mitre Saw 4000 rpm Proxxon - 27160 The advantage for miter cuts: the adjustment is not made on the saw head but at the level of the round table (with the workpiece fixed)!

THERMOCUT 230/E - Proxxon hot wire cutter for polystyrene and thermoplastic film - 27080 For architectural models, for designers, decorators, artists (also for practical applied art projects) and for building prototypes. And of course for classic model making (trains, planes, boats).

MBS 240/E - Micro band saw, maximum cutting diameter 85 mm, table 220 x 200 mm - 27172 Solid casing made of ribbed cast aluminum (construction neither of steel tubes nor of stamped sheets).

STS 12/E - 12V 100W 2A Jigsaw with speed control, supplied with 2 Proxxon blades - 28534 Ideal for cutting wood, sheet metal and non-ferrous metal. With a powerful special DC motor.

NG 2/E - MICROMOT 2A 24VA transformer with Proxxon regulation - 28707 MICROMOT transformers. The safe power source for MICROMOT devices in low voltage.

NG 2/S - Proxxon MICROMOT 2A 24VA transformer without regulation - 28706 MICROMOT transformers. The safe power source for MICROMOT devices in low voltage.

NG 2/E - MICROMOT 2A 24VA transformer with Proxxon regulation - 28704 MICROMOT transformers. The safe power source for MICROMOT devices in low voltage.

Parkzone control linkages with clevis joints for the Extra 300, reference PKZ5122. A replacement part intended for the indicated compatible model, for the routine maintenance of your radio-controlled airplane.

Power HD DS1217MG digital servo for RC applications, with metal gears and dual-bearing.Compatible 6V or 7.4V, it combines a composite/aluminum housing with a compact design suited to the needs of radio-controlled modeling.

Iconx Castle Red Keep Game Of Thrones Metal EarthInstallation without glue or paint, a small flat clamp is sufficient.Kit on pre-cut metal plates.From steel sheets to high-quality 3D models!Simply extract the pieces and assemble them using the tabs and holes.Dimensions: 9.9 x 3.5 x 6.8 cm

Assembly required. Full Kit Willys MB Jeep with trailer and cannon. - Lights- Steering wheel that drives the wheels- Removable Windshield- Die-Cast Scale: 1/8Manufacturer: IXOMaterial: Injected plastic and metalModel: Jeep Willys and accessoriesWeight: 10kgNumber of Pieces: 870

Nose wheel for the Parkzone F-27Q Stryker . Replacement part intended for the maintenance or repair of the nose landing gear of your radio-controlled model.

Nose wheel fairing for the F-27Q Stryker Parkzone, part number PKZ5611. Ideal for replacing or maintaining your radio-controlled model.

Wheel nuts for Extra 300 , reference PKZ5131 from the brand Parkzone . Ideal for replacing or maintaining your radio-controlled model.

JOYSWAY Focus II RTS monohull sailboat with MHD4S radio! - Length: 995mm - Width: 170mm - Total area: 52.73 dm² - Mast height: 1578mm - Total height: 2046mm - Weight: 3450g Content : - Molded plastic shells - 2.4 GHz MHD4S stick radio control (better range compared to the original Joysway radio)...

Anderson BS130 digital brushless servo for radio-controlled applications. This model features metal gears, double ball bearings, and a cross servo arm with silent blocks and screws included. Reference: 5600530109

Funtek Stadium Truck STX G2 1/12 XL 4x4 RTR The FUNTEK STX G2 , successor to the STX, is a 1/12th scale XL monster truck designed to offer power, robustness, and accessibility. Ideal for off-road racing, it combines a full metal transmission, reliable electronics, and a highly aerodynamic body.

MiniArt 35105 model kit of a French tank crew, 1/35 scale. Plastic set including 5 figures and accessories to assemble and paint. Reference: 35105.

Tamiya plastic model kit of the US M60A3 105mm Gun Tank at 1/35 scale. Reference 35140 .

The Amati Nina 1/65 scale wooden boat kit reproduces Christopher Columbus's famous caravel. Reference 1411. Length 37 cm, width 11 cm, height 43 cm. The kit includes a laser-cut keel and frames, double planking, sewn sails, rigging lines, wooden and metal fittings, an adhesive flag, as well as...

DW Hobby Aero Blade glider kit, reference FG07 / FG07 . Balsa wood structure with fiberglass fuselage, wingspan 1995 mm and length 1350 mm. Kit supplied without electronics.

DW Hobby VOGEE-08 wooden RC airplane kit to build, reference T05. Wingspan 800 mm, length 630 mm and flying weight of 450 g.

DW Hobby SE5.a balsa RC airplane kit, reference S44, WW1 model biplane. Wingspan 1010 mm and flying weight of 1 kg.

DW Hobby Albatros D.III balsa wood RC airplane kit, ref. S31 / S3101, assembly required. Wingspan 1800 mm, length 1430 mm, approximate weight 5 kg. Laser-cut balsa wood structure.

DW Hobby Piper J-3 Cub radio-controlled airplane kit, ref. SA1401 , to be built from laser-cut wood. Wingspan 2000 mm, balsa structure.

T2M spare part ref. T4933/02N: upper chassis with battery cover in 1/10 scale. Compatible with the new chassis T4933/01N.

Scalextric C4574 1/32 scale slot racing car, reproducing the 1995 BMW 320i BTCC of David Brabham , No. 17. Analog model with front and rear lights, Magnatraction system, DPR chassis and ARC AIR / ARC ONE compatibility.