30006-Controller 6a DYS
30006-Controller 6a DYS
30006-Controller 6a DYS
0

Controller 6a DYS

€12.90
Tax included
30006
DYS
2000000003139

Input voltage: 7.4V (2 Li-xx) / Ni-Mh
BEC: 5V 0.8Amp
Output: 7A (output: continuous 7A, 9A Max. up to 10 sec.)
Size: 10mm (L) x 7mm (W) x 2mm (H).
Weight: 5g

Order now and receive it...

between 6 Apr and 9 Apr  with  Colissimo Points de retrait €7.90

between 6 Apr and 9 Apr  with  Colissimo Domicile €8.90

between 6 Apr and 9 Apr  with  DPD Livraison en relais Pickup €7.90

between 6 Apr and 9 Apr  with  DPD Livraison à domicile Predict €8.90

between 6 Apr and 9 Apr  with  Lettre simple (sans assurance) €4.00

between 6 Apr and 9 Apr  with  Lettre suivi (sans assurance) €5.00

between today and 10 Apr  with  Magasin Next Model RC / Univers Train Free!

Hurry up! Only 8 item(s) left in Stock!

Input voltage: 7.4V (2 Li-xx) / Ni-Mh
BEC: 5V 0.8Amp
Output: 7A (output: continuous 7A, 9A Max. up to 10 sec.)
Size: 10mm (L) x 7mm (W) x 2mm (H).
Weight: 5g

Programmable Items:

1. Brake Setting: Enabled / Disabled, default is Disabled

2. Battery Type: Li-xx(Li-ion or Li-poly) / Ni-xx(NiMH or NiCd), default is Li-xx.

3. Low Voltage Protection Mode (Cut-Off Mode): Soft Cut-Off (Gradually reduce the output power) or Cut-Off (Immediately stop the output power). Default is Soft Cut-Off.

4. Low Voltage Protection Threshold (Cut-Off Threshold): Low / Medium / High, default is Medium.

1) For lithium batteries, the number of battery cells is calculated automatically. Low / medium / high cutoff voltage for each cell is: 2.6V/2.85V/ 3.1V. For example: For a 3 cells lithium pack, when ¡°Medium¡± cutoff threshold is set, the cut-off voltage will be: 2.85*3= 8.55V.

2) For nickel batteries, low / medium / high cutoff voltages are 0%/45%/60% of the startup voltage ( ie the initial voltage of battery pack), and 0% means the low voltage cut-off function is disabled. For example: For a 10 cells NiMH battery, fully charged voltage is 1.44*6=8.64V, when ¡°Medium¡± cut-off threshold is set, the cut-off voltage will be:8.64*50%=4.3V

5. Startup Mode: Normal /Soft /Super-Soft, default is Normal.

Normal is preferred for fixed-wing aircraft. Soft or Super-soft are preferred for helicopters. The initial acceleration of the Soft and Super-Soft modes are slower in comparison, usually taking 1 second for Soft startup or 2 seconds for Super-Soft startup from initial throttle advance to full throttle. If the throttle is closed (throttle stick moved to bottom) and opened again (throttle stick moved to top) within 3 seconds of the initial startup, the restart-up will be temporarily changed to normal mode to get rid of the chances of a crash caused by slow throttle response. This special design is very suitable for aerobatic flight when quick throttle response is needed.

6. Timing: Low / Medium / High, default is Low.

Usually, low timing value can be used for most motors. We recommend the Low timing value for 2 poles motor and Medium timing value for motors with more than 6 poles to get a high efficiency. For higher speed, High timing value can be chosen.

30006

Specific References

EAN13
2000000003139

Controller 6a DYS

€12.90