Disruptor VXL 4S Traxxas 106064-4 - TRX-106064-4

Available for sale in stores immediately.
Available for sale online from October 18.

The all-new 4s Disruptor is a high-performance boat designed for thrill-seekers. It reaches impressive speeds of over 64km/h with a single 4s LiPo battery. Measuring 66cm in length, the Disruptor is perfectly sized for fast and agile maneuvering in small ponds, while remaining stable in open water. Designed by Traxxas, this boat is meant for extreme stunts and limitless fun, with the "Rapid Right" system to self-right, ensuring increased safety and uninterrupted action.

RAPID RIGHT SECURITY
There's no need to slow down or curb the fun thanks to the Disruptor's "Rapid Right" safety. Take full advantage of the Velineon 4s brushless power anytime, anywhere. If the Disruptor flips over, simply apply reverse gear at full speed to right the boat almost instantly and get you back into action.

AGILE HANDLING
The Disruptor's perfectly sized hull offers agile handling for tight turns, while reaching an impressive speed of over 64km/h. Its new low-center of gravity design concentrates weight along the centerline for perfect distribution. Accelerate hard, and the Disruptor quickly gets into glide mode with lightning-fast reflexes and high-speed stability.

NEW 4S PROPULSION SYSTEM
The Velineon VXL-4s brushless marine propulsion system is a revolutionary design, optimized to deliver maximum thrust with a single 4s LiPo battery. The all-new brushless outrunner motor combines efficiency and power, combining impressive torque with high RPM speed. Two independent water cooling systems keep temperatures under control for maximum uptime.

INJECTION-MOLDED ABS SHELL
The ABS shell of the Disruptor offers superior strength and rigidity, which is essential to support the high power of brushless motors without adding unnecessary weight. Its unique injection-molded design includes multiple support beams and ribs for exceptional strength. Molded reinforcements hold the removable electronics turntable in place with minimal attachment, allowing for additional weight savings.

RAPID RIGHT SELF-RIGHTING SYSTEM
The Disruptor's impressive speed and maneuverability encourages jumps, spins, and rollovers, which can sometimes flip it over. A simple reverse stroke, and the "Rapid Right" self-righting system instantly puts the Disruptor back on its feet, ready to take on the waves again.

HIGH-PERFORMANCE HULL
The Disruptor's 66cm injection-molded ABS hull offers incredible strength thanks to its deep V design, ideal for cutting through waves. Precisely molded ridge detailing on the lower shell enhances the Disruptor's maneuverability and stability. The reinforced rigidity of the hull also ensures a better seal of the hatch and effective protection against water.

WATERPROOF HATCH WITHOUT CLIPS
Four locking nuts hold the Disruptor's hatch firmly in place, and it releases in seconds with a simple turn of the included tool. The rigid, injection-molded hatch fits snugly against a foam gasket to keep water out. No matter how intense the stunts, this hatch stays locked until you decide to release it.

VXL-4S MARINE PROPULSION SYSTEM
With a single Traxxas 4s LiPo battery, the Disruptor slices through water at speeds in excess of 64km/h. For beginners or lovers of leisurely cruising, Traxxas' patented drive mode reduces power by 50%. The Disruptor is also compatible with 2s and 3s LiPo batteries for more relaxed browsing sessions.

REMOVABLE ELECTRONIC TURNTABLE
The Disruptor's electronics, power and propulsion system is securely attached to a rigid plate, making it easy to remove and maintain. Detach the steering linkage, flexible cable, and stern tube, then remove the screws to lift the entire system. No other boat makes access to the inside of the hull and the electronic components so simple.

TQ RADIO SYSTEM
The TQ 2.4 GHz radio system allows you to concentrate on the fun without fear of interference from other boats. The TQ radio's advanced programming provides long-range control with smooth, undisturbed performance. Its ergonomic design ensures optimal comfort for extended sailing sessions.

WATER-COOLED ELECTRONICS
Two water intakes under the hull send cooling water independently to the engine and ESC. A wide finned heat sink, with an internal water channel, continuously cools the ESC to prolong the fun on the water. A machined, water-cooled aluminum engine mount dissipates heat from the engine to keep temperatures under control.

ACCESSORY TRAILER
Haul the Disruptor to the lake in style with this two-axle, scaled replica two-axle trailer (P/N 10650, sold separately). The hull of the Disruptor is equipped with a built-in eyelet to use the optional winch hook, providing an authentic sailing experience.

HIGH PERFORMANCE PROPELLER
The Disruptor's propeller allows the boat to quickly get into position to reach its maximum speed while minimizing current consumption. Traxxas engineers have tested countless propeller configurations to find the perfect balance of performance, efficiency, and durability. Its molded composite construction makes the propeller lightweight and strong, without the need for balancing or sharpening.

HIGH-STRENGTH ALUMINUM MATERIALS
The Disruptor's rudder and propulsion attachment are machined from 6000 series aluminum, known for its maximum strength, and then anodized in bright blue for an unmistakable Traxxas look. The propulsion attachment is equipped with special lubricated bushings to ensure corrosion-free performance.

STAINLESS STEEL SCREWS
The Disruptor uses corrosion-resistant stainless steel and nickel-plated screws and fasteners for a neat appearance, easy maintenance, and long-lasting performance.

STAINLESS STEEL STABILIZERS AND CORNERING FINS
Dual stabilizers and cornering fins are essential to the Disruptor's high-speed performance. These parts are precision-cut and bent in stainless steel to resist corrosion while providing aggressive cornering and an optimal hull position to reach extreme speeds.

DUAL WATER INLETS AND OUTLETS
Two water intakes in the hull independently route the cooling water to the motor and ESC. A double-outlet plate, profiled at the rear of the boat, evacuates water through the stern.

CLIP-FREE LOCKING SYSTEM
The Disruptor is factory-fitted with heavy-duty, contoured hatch nuts to securely hold the rigid ABS hatch. A simple turn with the tool provided allows full access to the inside of the shell. The Disruptor also comes with a set of wing nut options for quick tool-free installation and removal.

FACTORY-APPLIED GRAPHICS
The Disruptor's bold graphics draw all eyes to the lake, with a custom look that even professional painters would struggle to match. No paint is required: all graphics are factory-applied, allowing the Disruptor to go straight from the box to the water with style and speed.

66CM DEEP V SHELL
The Disruptor is perfectly sized for fun with its lightweight and maneuverable 66cm hull. The deep V hull design provides increased stability in rough waters and allows for quick and efficient gliding for maximum acceleration and speed.

FLEXIBLE CABLE PROPULSION SYSTEM
Originally designed for extreme power in 6s, the Disruptor's flexible cable propulsion system is efficient, reliable, and ready for hours of fun. The Disruptor's electronic turntable positions the engine closer to the stern, providing a shorter, more direct path to the propeller.

HIGH-TORQUE WATERPROOF SERVO
The Disruptor requires a powerful steering servo for responsive performance, and Traxxas meets that need with the high-torque 2056 servo. The O-rings make the servo fully sealed, providing an impressive steering force of 5.7kg.cm of torque for optimal control.

QUICK-RELEASE FLEXIBLE CABLE
A clamping collar firmly holds the Disruptor's flexible cable and aligns it perfectly with the motor's output shaft for smooth and efficient operation. The collar is quickly released in one turn with the included keys for easy maintenance. Once loosened, the propeller and flexible cable simply slide out, making it easy to keep your Disruptor in top shape.

3-CHANNEL RECEIVER WITH FAIL-SAFE SAFETY
In the event of a signal loss due to accidental transmitter switching off or dead batteries, the receiver automatically returns the throttle to neutral and maintains the last commanded direction position. The fail-safe system is integrated and activates automatically, without the need for additional configuration.

BRUSHLESS OUTRUNNER MOTOR
The Disruptor's brushless outrunner motor is optimized to deliver maximum power and high efficiency at high rpm in marine applications. It is equipped with ultra-high-temperature sintered neodymium magnets, a precision-balanced rotor, and high-speed ball bearings.

SEALED RECEIVER BOX
The waterproof receiver box patented by Traxxas allows cables to be routed cleanly through a special hermetic seal. A blue O-ring allows easy access to the receiver housing while maintaining its sealing properties.

WATERPROOF ELECTRONICS
In a marine environment, waterproof electronics are a must. Traxxas' electronics are fully waterproof (not just water-resistant). The speed controller, servo, and receiver all feature rugged water protection for reliable operation you can count on.

MARINE SPEED CONTROLLER VXL-4S
The VXL-4s marine speed controller uses a single 14.8-volt 4s LiPo battery to reach a maximum speed of more than 64km/h (it is also compatible with 3s and 2s LiPo batteries). The VXL-4s Marine is equipped with an oversized aluminum heatsink with built-in water cooling for reliable all-day performance. Traxxas' patented drive mode can be activated to limit power to 50% for new riders.

BUILT-IN BUOYANCY
The Disruptor's built-in foam buoyancy ensures that the boat stays afloat, even in harsh conditions. In addition to making the Disruptor virtually unsinkable, the form-fitting foam insert adds extra rigidity to the bow.

WHAT'S IN THE BOX:

• Disruptor 4S boat with brushless motor and ESC VXL-4s Marine
• TQi 2.4GHz flying radio

Provide 4 AA batteries for the transmitter, 4S Li-Po battery (Traxxas ID plug) and Traxxas ID LiPo charger.

FEATURES:

• Length: 660 mm
• Width: 194mm
• Weight: 1660g
• Engine: Velineon Marine
• Controller: VXL-4S