List of products by brand Hobbytech

Diameter 26mmBell 16 teeth with 2 bearings waterproof.

1/8 weights, 3 points Alu + Clutch Spring Kit Hobbytech HTR-1920002

Universal rudder servos. Comes with 3 adapters for servos (23, 24 and 25T) Futaba, Savox, Sanwa, KO, ACE...

Universal rudder servos. Comes with 3 adapters for servos (23, 24 and 25T) Futaba, Savox, Sanwa, KO, ACE...

12mm hexagon.Front wheels.2 mounted tires glued to full white rims.

Set of 2 Climber crawler tires 1.9" on Bedlock Chrome 1/10 rims. HT-SU1802002

Typical coal-fired motor 550, 16T.Compatible with most RC electric cars on a 1/10th scale type buggy, truggy or Monster Truck...

Konect / Hobbywing 40A Drive waterproof for coal engine 1/10 special Crawler and Boats.Compatible Li-Po.Small footprint for high power and engine brake.Automatic gas stroke calibration, easy to use.Lipo cut, Fail-safe, Thermal protection.

Crawler CRX V2 in RTR version at 1/10 scale from Hobbytech - 1.CRX2.RTR • Length: 525mm • Width (front/rear): 253mm • Height: 245mm

Hobbytech all-terrain 1/8 Maxi Cross tires mounted on white rims. Comes by 2.For TT 1/8 hexagon 17mm.

Konect Variator 150Amp WP Konect Engine 2200KVProgramming map

Steel engine gable.Comes with 3x3 headless screw

Steel engine gable.Comes with 3x3 headless screw

Introducing the new Spirit NXT Evo V2 brushless off-road 4x4 buggy from Hobbytech. This car is capable of reaching incredible speeds thanks to a 100A Konect waterproof drive combined with a 2000kv brushless motor. Brand designed and developed in France!4S 5200mAh Lipo Battery & Charger &...

Steel engine gable.Comes with 3x3 headless screw

Steel engine gable.Comes with 3x3 headless screw

Steel engine gable.Comes with 3x3 headless screw

Steel engine gable.Comes with 3x3 headless screw

Steel engine gable.Comes with 3x3 headless screw

Steel engine gable.Comes with 3x3 headless screw

Buggy 1/8 thermal 4x4 radio controlled HobbyTech NXT GP Version 2 with 3.5cc pull engine.Maximum height. : 220 mmWheelbase: 329 mmTotal weight: 3325 grNecessary not included:- Starter set- Fuel- 4 AA batteries for remote control

20-tooth engine gable.For 1/8 electric TT. For 5mm axis.

Coal electric motor type 540, 55T.Compatible with most rc electric cars at 1/10th scale type Crawler...

Li-Po 6700mAh 60C 4S 14.8V shelled battery (XT90) Bashing series KonectAll batteries in the Konect range are composed of grade A cells that certify high quality batteries. Konect batteries thus accept a large number of charge/discharge cycles.

The ROGUE TERRA is the new monster truck from home HOBBYTECH. A unique 4WD chassis, equipped with an engine brushless, to ride on all terrains and in all weathers.- Brushless motor size 3660 with built-in fan- KONECT controller 80Amp SCT WP 2-3S Li-PoComes with a motorization Konect...

- New special brushless crawler motor with integrated ESC- Ultra quiet, torquey, linear and very flexible.- Waterproof Combo

Transparent bodywork delivered with accessories and stickers.It is compatible with scales with a wheelbase of 313 mm.It can also be adapted in Dangel version on the CRX Hobbytech.

• For 1/8 & 1/10th Buggy & Track• Dual 775 engines• Power supply 2 x 7.2V Ni-mh or 2 x Lipo 7.4V (or 1 Li-Po 14.8V or 12V battery outside by modifying the connectors).Wired 2 Tamiya sockets in series.

For starter bench Hobbytech Racing ref HTR-001Outer diameter: 71mmInner hole diameter: 20mmSpacing fixing holes: 35mm

Steel wrench, 3/4/5/5.5/7/8mm.

The 17 mm aluminum wheel wrench for 1/8 off-road cars.

Standard:L3: HotN4: Medium HotN5: Medium ColdN6: ColdTurbo:T5: HotT6: Medium Heat (all seasons)T7: Medium ColdT8: Extra Cold

CRX2 crawler kit, 1/10 scale, by Hobbytech, with Toyota Land Cruiser LC70 body - 8.CRX2-LC70 CRX2 Hobbytech 1/10 scale radio-controlled scale crawler kit to assemble with wheels and TOYOTA Land Cruiser body.

Screw set for RC car 1/10 or 1/8.

Crawler CRX18 Survival in RTR version to scale 1/18 of the Hobbytech brand - 1.CRX18Wheelbase: 153.7 mmTotal length: 257 mmWidth: 123.8 mmHeight : 120.60 mm

Spreader for 25-tooth type servos. Futaba, Savox, Konect...

Foams for 1/8 Off-Road Air Filter with double foam.

Set of 5 titanium screwdriver bits. Allen 1.5/2/2.5/3.0 and 7mm socket.

The kit of 4 BTR 6-point screwdrivers.Set of 4 Allen Red and Black Screwdrivers 1.5/2/2.5/3mm

New Combo Konect G2 for 1/10th. This combo is ideal for converting to brushless any type of RC car on a scale of 1/10 in 2 or 4 wheel drive: track, buggy, drift, stadium, monster...Included in the box is a motor and a 60A ESC by Hobbywing.ESC 60A / 4600 kv 4-pole motor.

CRX18 Flat Cage Crawler RTR version to scale 1/18 in 6x6 version of the Hobbytech brand - 1.CRX18-6WD-FCWheelbase: 155.20 mm + 65.7 mmTotal length : 298.20 mmWidth: 123.8 mmHeight : 120.60 mm

New Combo Konect G2 for 1/10th. This combo is ideal for converting to brushless any type of RC car on a scale of 1/10 in 2 or 4 wheel drive: track, buggy, drift, stadium, monster...Included in the box is a motor and a 60A ESC by Hobbywing.ESC 60A / 5400 kv 4-pole motor.

The ROGUE TERRA is the new Monster truck from HOBBYTECH, now in a Brushless version. A unique 4-wheel drive chassis, for driving on all terrains and in all weather. Konect 2200kV brushless motor with a radiator and fan to maximize reliability. Comes with a waterproof Konect motor. Complete RTR...

Modular storage bag 25x23x10cm Hobbytech Racing.

Hobbytech Racing 54x26x22cm carrying bag. HTR-B0005

The ROGUE BUGGY V2 is HOBBYTECH's new brushless buggy. It features a brand-new 4-wheel drive chassis, allowing it to handle all terrains and weather conditions. Equipped with a 2200kv Konect brushless motor and a heatsink/fan for maximum reliability. Supplied with a Konect waterproof motor....

ROG-081 Caliper Screws for Rogue Terra, Rogue Buggy

ROG-022 Caliper Screws for Rogue Terra.