Brushless drive XERUN XR8 Plus 150A 1/8 Hobbywing

Current : 150A, burst 950A
Input : 2-6S Lipo or 6-18 cell NiMH
Resistance : 0.0002Ω
BEC output : 6V/7.2V, 6A / Max.15A (Switching mode)

Highly reliable
Thanks to years of technical improvements, the XR8 is the most powerful and accomplished controller of all its predecessors.
This new generation of controller not only delivers extraordinary power but is also protected against the problems that overloads can cause. This reduces the possibility of failures and increases its long-term reliability.

Dynamic Timing Programming
This is the first 1/8th scale controller in the world to be equipped with Dynamic Timing technology, a technology that has become essential and has long been proven in 1/10th scale competition, especially Touring.
An additional adjustment range, which will allow you to have even more power available for long accelerations while maintaining smooth acceleration.
(Note: Dynamic Timing is only applicable to 2-pole motors with the controller in "pure sensored" mode)

Avant-garde and secure switch
The electronic switch in this controller has a lifespan of over 50,000 on/off cycles. Its high-quality construction makes it waterproof, dustproof, and shockproof. No more unexpected shutdowns due to impacts (or landing from a jump), and no more contact problems caused by dust, humidity, or even oxidation inside the switch.

Optimized cooling system
Hobbywing has patented a completely new cooling system for the controller's internal electronic board, which is directly cooled by the external machined aluminum casing.
In addition, the fan has adopted an "anti-shock" design, specially designed to reduce failures following numerous jumps on the circuits.
This new, optimized cooling system will ensure that the controller always operates under optimal internal temperature conditions.

Automatic Mode Switching
The ESC will automatically switch from sensored mode to sensorless mode during the run.
This allows the vehicle to continue driving if the controller detects an abnormal signal from the sensor.

A great internal BEC
This is the world's first 1/8th scale controller with a superb internal BEC capable of delivering a maximum current of over 15A, while offering a choice between 6V or 7.2V (via controller settings). It can power various servos, including high-voltage servos, providing incredible ease of use and performance for pilots.

Free and easy to maintain
The entire controller is easy to maintain.
You simply need to unplug the fan to replace it, and you are free to disassemble the entire controller for complete internal maintenance.