ProQuad GT Power Charger - GT-PROQUAD

PROQUAD 4 output charger/discharger for NiMh, NiCd, Li-Ion, LiPo, LiFe and Pb batteries with integrated balancer, on 12 volts or 240W (4x100w).

With 4 independent circuits, the power is 100W per circuit or 400W in total.
The ProQuad can charge up to 4 x 15 NiCd/NiMH cells or 4 x 6S Li-Po cells. Each output can charge up to 7A (depending on the number of cells).
Also, 2 USB outputs of 2.3A each!

Features :

Charge, Discharge, Cycle, 4 independent circuits
Power supply: DC: 11V-18V / AC: 100-240V
Charge Current: 4x 0.1A ~ 7A
Discharge Current: 4 x 0.1A ~ 1A (5W)
Number of elements: NiCD, NiMH up to 15, Li-ion, LiFe, LiPo up to 6s, Lipo-balancer built-in.
Pb 2 at 20v.
USB outputs: 2 x 5V at 2.3A
Battery data displayed after each charge or discharge.

Included with:

1 x Charger
4 x JST-XH connection boards
4 x JST-XH extension cords
2 x XT60 charging cables
2 x DEAN charging cables
1 x DEAN female / JST male BEC adapter cable
1 x DEAN female / Tamiya adapter cable
1 x DEAN female adapter cord / alligator clips.
1 x XT60 male adapter cable / alligator clips (for 12V power supply)
1 x EU 220V power cord
1 x Instruction Manual