Cleaner engine Clean Engine 250ml Labema - CLEAN/2.5

Product :

• THE CLEAN ENGINE
• Hot water preferably

Preparation :

• Disassemble the engine parts to be moved
• DO NOT PLACE THE ENTIRE MOTOR IN THE PRODUCT, RISK OF DAMAGE
• Block the engine inlets: carburetor and exhaust

Material :

• A paintbrush
• A soft brush, like an old toothbrush or nail brush (do not reuse for its original purpose!)

SAFETY INSTRUCTIONS:

• Causes severe burns
• Keep out of reach of children
• In case of contact with eyes, rinse immediately and thoroughly with water and consult a specialist.
• Remove any soiled or splashed clothing immediately.
• Wear appropriate gloves and eye protection
• MUST USE: Gloves, safety glasses and protective clothing

STRIPPING:

• Thoroughly saturate the areas of the piece to be stripped with the undiluted product using a brush.
• Leave to act for 5 to 10 minutes
• Do not allow the product to dry on the part
• Scrub with a soft brush
• DO NOT RUB WITH A METAL BRUSH
• Rinse the part with hot water and, if necessary, after run it, then dry.
• If some areas are still dirty, repeat the procedure.