Truck tipper UGM-11 Puzzle 3D wood UGEARS

Difficulty: 3 (Expert)

Age: 14 years old

The four-cylinder engine is powered by a crankshaft which derives its power from a fully functional drive shaft turned by a rubber band motor and gear system.

The UGM-11 Truck has three operating modes: forward, reverse, and stop, all controlled by a gearshift lever on the side. When this lever is in stop mode, you can start the 4-cylinder engine and watch the four pistons move under the hood. You can also look through the cab door and see the fully functional steering wheel connected to the front wheels via a steering column. Pressing on the front of the truck reveals the suspension made entirely of wood—it's incredibly realistic.

The rubber band motor is of the serpentine type with a lever mechanism on top of the cab. The accelerator (gas) pedal increases the engine speed when pressed, greatly enhancing the realistic appearance of this construction kit.

The UGM-11 Truck requires a little more time to assemble than other models. The assembly manual has been carefully designed to guide you through the entire process.

Self-assembly required, no glue needed.

Model dimensions: 34x12x12 cm
Number of pieces: 420

Assembly: approximately 15 to 20 hours