LUCKY Gloss Acrylic Paint (17ml) 17ml Mig

Applying varnish has long been one of the biggest challenges for modelers. Many have ruined models due to the use of poor-quality or unsuitable varnishes, and the fact is that the varnishing process is an extremely important step in the building process. For the first time, AMMO is launching a complete range of varnishes for winning results on every model. These acrylic varnishes will allow you to achieve the best results with both a brush and an airbrush in a very simple way. It should be used in thin coats and can be applied directly from the pot without dilution for a perfect finish. When using an airbrush, we recommend spraying 6 inches (15 cm) from the surface. It is non-toxic and odorless, and dries completely in 24 hours. This new range of varnishes has been carefully developed over a long period to ensure the modeler achieves perfect results every time. Don't take risks, use LUCKY VARNISH, a winning product that eliminates any mishaps that can occur when using ordinary varnish. Available in all the usual finishes used in scale modeling, from gloss to flat. Easy to use and simple to clean. Incredible clear finishes for all your models, and precise for all subjects. Won't yellow or alter colors. Perfect for brush and airbrush. 1- Using an airbrush, apply in light, short passes using an air pressure of 1.2 bar (17 psi), which will cause buildup. 2- Allow at least 5 minutes to dry between coats. DO NOT flood the surface. 3- Allow to dry completely for 12 hours. No highlighting required. Clean with A.MIG-2000 Acrylic Thinner or water.