0
Customer service
clear
Customer service
Our Contacts:
Mon-Fri: 9:00 am - 6:00 pm
Sat: 9:00 am - 4:00 pm
Sun: 9:00 am - 2:00 pm
8-100-9000-300
demo@demo.com27 Oak Street, Tenafly, US, 07670
Delivery:
Free delivery all orders of $120 or more of eligible items across any product category qualify
Payments:
Credit Card: Visa, MasterCard, Maestro, American Express
Return Policy:
You can return any item purchased within 16 days of the delivery date
Customer service
MICROMOT 60 - 12V milling drill, with 6 Proxxon clamps
€29.00
Tax included
PRX-28500
MICROMOT 60 (replaces MICROMOT 50) Drill 12V 20000 rpm 6 clamps 1-3.2 mm Proxxon - 28500
The new MICROMOT 60, the 4th generation of a tool made in the EU that has proven itself millions of times.
Order now and receive it...
between 25 Feb and 2 Mar with Colissimo Points de retrait €7.90
between 25 Feb and 2 Mar with Colissimo Domicile €8.90
between 25 Feb and 2 Mar with Livraison en relais Pickup €7.90
between 25 Feb and 2 Mar with Livraison à domicile Predict sur créneau horaire €8.90
Hurry up! Only
1
item(s) left in Stock!
Drill Milling machine MICROMOT 60
Particularly maneuverable thanks to their diameter of 35 mm, they also have a reduced weight (approx. 230 g), pleasant noise and smooth operation thanks to a balanced motor and the rectified axis mounted on a ball bearing. The use of MICROMOT clamps made of high-quality steel (see description below) allows extremely concentric tightening of the smallest tool tails. There is no grazing or jerking of the tool.
The use of MICROMOT 60 devices requires a transformer. We recommend micromot ng 2 transformers.
- 20 mm collar fastening system allows use with THE MB 200 vertical bracket and the UHZ universal bracket.
- Robust housing made of POLYAMIDE reinforced with fiberglass. With flexible component in the grip area.
- Electronic progressive adjustment of the rotational speed with feedback effect. For high drive power at low revs.
- For drilling, milling, sanding, polishing, brushing, cutting and engraving. For the processing of steel, precious metals, glass, ceramics, plastic and minerals.
- With safety voltage at low voltage. So also suitable for working with coolant (polishing and cutting under liquid).
- For electronics do-it-yourselfers, modellers, precision mechanics, goldsmiths, opticians, sculptors, pedicures, dentists, tool and mold making.
Without adjusting the rotational speed. (Constant 20,000 rpm). Tool holder by micromot steel clamps (1 piece 1 - 1.5 - 2 - 2.4 - 3 and 3.2 mm).
Remark:
The speed control of our 12-volt units only works with unstabilized power supplies (e.g. all MICROMOT transformers). A connection to stabilized power supplies is possible. Nevertheless, the devices then operate at maximum speeds (this also applies to battery operation).
Remark:
MICROMOT steel clamps are hardened, which gives them a high and constant elasticity 
. They retain the necessary precision even after a long use (incomparable to unquenched clamps with 4 slots or those made of brass or aluminum. The triple slot 
which is much more difficult to achieve than a quadruple slot, allows to obtain 
better sitting. This is especially important for the centering of stems with a small diameter.
Technical data:
Direct current 12 - 18 V.
40 W.
20.000/min.
Length of 220 mm.
Weight 230 g.
Appropriate accessories:
FS foot switch
Work hands-free. For all devices with a European plug (class 2) and a power up to 500 W max. Also suitable for workbench devices. Nylon case reinforced with fiberglass. Cord 250 cm for mains 230 V. 50 cm of cable output. For 12 V devices, the switch can be connected to the transfo.
NO. 28,700
MICROMOT extension cord
300 cm. For 12 volt devices. Male and female plugs with polarity.
NO. 28,992
PRX-28500
