Crawler CRX2 kit Toyota Land Cruiser LC70 1/10 Hobbytech

The CRX2 kit comes with the LC70 body.

Rocker body mounting (without clips)

What's New:

New chassis with adjustable wheelbase
New anti-torque twist transmission
New WOLF SHOCKS aluminum shock absorbers (droop and semi-droop)
New "realistic" central drive shafts made of treated steel
New front and rear axles
New front rockets with 0° Ackerman angle
New rocket carriers with PANHARD support=
New front and rear suspension links
New multi-position battery holder
New shock absorber mounts
New SMD circuit board (servo mounting on chassis)
New central stiffening bars

Included with:

• 1.9-inch tires and rims
• Painted bodywork
• Sticker sheet
• Without electronics

Not included:

Brushless motor (recommended combination: KN-40-540-1800-FUS)
Or Brushed (ESC and motor recommended: KN-BRUSH40-CRAWBT and KN-M5540-55T)
Servo (recommended: KN-2113LVWP)
Battery (recommended: KN-LP2S5200)
Charger (recommended: KN-MULTI60-PLUS)
Radio and receiver (recommended: KN-KT3S-PLUS-SET)

Adjustable wheelbase
Thanks to its adjustable wheelbase, it is possible to adapt a large number of body styles to the CRX2

Multi-position battery holder
It is possible to choose different battery positions depending on the desired performance. The system also allows the use of different battery formats.

ACKERMANN 0°
The new steering knuckles and CVD universal joints allow for a 0° Ackerman angle. When cornering, the wheels remain parallel, which improves the steering angle.

Anti-Torque Twist System
To prevent torque twist (wheel lift during acceleration), the new transmission allows the central driveshafts to rotate in the opposite direction. The CRX2 can therefore handle with significantly greater stability and efficiency.

TIRES, "CLIMBER" 121/45
This tire, designed and manufactured by Hobbytech, ensures perfect traction for your scale model. This tire is a hit with hobbyists! It's compatible with the TRX4. It comes with a foam insert and mounts on 1.9" rims.
Diameter: 121 mm Width: 45 mm

Complete Wolf Type 90mm shock absorbers
Adjusting the "Wolf" shock absorbers for the CRX2:
Recommended assembly = semi-droop: small flexible spring at the bottom and medium-sized flexible spring at the top.
"Scale" type realism assembly = droop adjustment: medium-sized flexible spring at the bottom and small flexible spring at the top.
Lubrication = filling a part of the body with very fluid silicone oil (100 cps for example)