Crawler CRX18 Flat Cage 6WD RTR 1/18 Hobbytech

New 6WD and Flat Cage version: The CRX18 6WD flat cage has the same features as the CRX18 but with 2WD additional drive. The CRX18 6WD offers new horizons and new riding possibilities. It also differs in its rear platform equipped with a roll bar and a spare wheel. Other realistic accessories also complete this model. 

The CRX 18 is a 1/18th scale reproduction of the CRX: the emblematic model of our brand. 

The mini is designed as a 1/10th scale: metal beam chassis, central gearbox (positioned slightly on the front) with a motor in a low position and 2 axles which are each connected to the chassis by 4 links.

The steering micro servo is a 3-wire model with a standard plug. To lower the center of gravity as much as possible, it is located on the foredeck (AMS mounting). The engine is entrusted to a 55T micro coal engine.

In terms of electronics, the CRX18 is equipped with an all-in module (receiver – ESC) which has 9 sockets to connect a complete ignition system with turn signals and brake lights. The CRX is equipped with 2 LED headlights that can be controlled via the remote control. Finally, the battery is a 600 mAh 2S that allows you to drive for several hours.

Aesthetically, the CRX18 is a faithful reproduction of its big brother. The bridges have the same design as those fitted to the CRX2. The bodywork has the same grille and the same accessories (jerry can, snorkel, windscreen wipers and mirrors). Finally, the tires are an exact reproduction of the Climber. A nice little detail: the running boards are equipped with a slot in which the bottom of the body is housed so as not to damage it on obstacles.

Many options will be available to improve the performance or the look of the CRX18: ball bearings, hydraulic shock absorbers...

The CRX18 allows you to ride indoors or outdoors. Small spaces as well as large ones suit it perfectly. Its crossing capacities are impressive. On rocks: its lightness, balance and the efficiency of its tyres allow it to overcome incredible obstacles. The radio allows you to adjust the limit switches (throttle and steering). The throttle adjustment allows you to fine-tune your ride and adapt the speed of the CRX18 to the terrain and obstacles. 

Characteristics:

- 6x6 transmission
- Rigid Axle Front and Rear
- Realistic step
- Optimized weight distribution
- Lexan Survival Body
- Realistic front and rear bumpers
- Radio 2.4 Ghz
- 3-Wire Steering Servo
- Special Crawler Engine
- Special Crawler Variator
- 7.4V 600mah Lipo Battery
- Lipo charger via USB
- Tools included (1 screwdriver + 1 wheel wrench)

Inclusive:

Size:

Wheelbase: 155.20 mm + 65.7 mm
Total length : 298.20 mm
Width: 123.8 mm
Height : 120.60 mm
Gearbox Ground Clearance: 39.70 mm
Ground clearance at the level of the bridges: 17.1mm
Front Angle of Attack: 59°
Rear Approach Angle 76.9°

Necessary (not included):

4 AA batteries for the remote control