Volance Eagle 1m PNP XFly Wing

Powered by a 4S Lipo battery, the two factory-installed 40mm EDFs allow the aircraft to exceed the power-to-weight ratio of 1:1.5 and easily take off by hand. The friction-resistant plastic components under the belly and wing tips allow the aircraft to land on rough surfaces. With a simplified airfoil, special EDF configuration, and custom gyroscope-assisted setup (optional), the Eagle is capable of delivering differential speeds, rollovers, flat spins, inverted flat spins, and other challenging maneuvers, with a top speed of 177 km/h. It's fully factory-assembled and ready to fly right out of the box. There are two eye-catching color combinations that will ensure you don't have to worry about losing sight of the plane in the sky.

If you're looking for a hand-launched racing aircraft, look no further than the XFly Eagle!

Key features:

Rugged EPO construction.
Special flying wing configuration and new 40mm EDF power system on both wing tips.
Large battery compartment for a 4S 1800-2200mAh Lipo battery.
Exceptional power-to-weight ratio.
Easy manual launches and safe landings on rough surfaces.
Capable of providing differential speeds and performing rolls, flat spins, inverted flat spins, and other difficult maneuvers, when assisted by the custom gyroscope. The top speed is up to 110MPH+.
Fully factory assembled and ready to fly right out of the box.
Available in two eye-catching color palettes.

Technical characteristics:

- Wingspan: 1019mm
- Length: 383mm
- Flying weight: 650g
- Engine: 1413-KV5000*2
- ESC: 20A*2
- Servo: 9g*2 servos
- Channels: 5 channels - aileron, elevator, throttle, rudder, gyroscope
- CG: 162 mm from leading edge
- Wing loading: 35 g/dm²
- Wing area: 19.5 dm²
- Recommended battery: 4S 1800-2200 mAh
- Approximate flight time: 5-10 minutes

Essentials not included:

- Minimum 4-way remote control and receiver
- Li-Po 4S 14.8V 1800 - 2200 mAh XT60 socket
- Li-Po charger