Proxxon Accessories

3-bit concentric clamping chuck for wood lathe DB 250 Proxxon - 27026Concentric clamping.Steel under pressure.

Extension cord for MICROMOT Proxxon devices - 28992300 cm.For 12-volt appliances.Male and female plugs with polarity.

Adapter for sharpening helical forests up to Ø 3 mm - Proxxon 21232Ø 1.5 to 3 mm for BSG 220 sharpener.1 piece of each in diameter 1.5 - 1.6 - 2 - 2.4 - 2.5 and 3 mm.Clean packaging in a wooden box with sliding lid.

Blade holder with blade for tower PD 250/E Proxxon - 24217For the PD 250/E quick change system.Allows you to cut parts to length and drill grooves.

Chuck 3 jaws from 0.3 to 3.2 mm for MICROMOT Proxxon devices - 28941For all MICROMOT devices that accept this equipment: FBS 12/EF grinder-drill, FBS 240/E precision grinder-drill, MICROMOT 60/EF milling drill and micromot 110/BF flexible. Advantageous especially for working with different axis...

Clamping device with clamps ER 20 for tower PD 250/E Proxxon - 24038Clamping device with clamps type ER 20.For an extreme concentricity of 2 - 10 mm.

Floor sliding machine with jaw prisms Primus 75 Proxxon - 20392 Bit width of 75 mm.Aperture 65 mm.

Fixed bezel for tower PD 250/E Proxxon - 24010Fixed bezel for long parts (especially longitudinal turning).Up to ø 40mm.Also essential when the mobile doll can not be used.

Flexible 110/P with 3 ball bearings 35000 rpm with 6 pliers from 1 to 3.2 mm - 28620With precision aluminum accessory holders. With fast-tightening chuck.

FMS 75 - Precision mechanical floor with suction cup, opening 70 mm jaws 75 mm Proxxon - 28602With gasket. In zinc cast under pressure.

FMZ - Precision mechanical extend with clamp, opening 70 mm jaws 75 mm Proxxon - 28608With a clamp. Zinc sunk under pressure.

Glue sticks - 7 mm for HKP 220 delivered by 12 Proxxon sticks - 28194

Individually adjustable 4-bit chuck, Ø 75 mm for TOWER PD 250/E Proxxon - 24036For the tightening of angular and asymmetrical parts.

Inter-tip turning device for PD 250/E Proxxon tower - 24014 Inter-tip turning device. For high precision work with high concentricity.

Mandrel 4 bits for wood lathe DB 250 with independent bits Proxxon - 27024Individually adjustable bits.For the tightening of asymmetrical wooden parts.

Mandrel up to 10 mm for LATHE PD 250/E Proxxon - 24036Industrial chuck with CM 1For the mobile doll of the PD 250/E lathe.

MB 200 - MICROMOT Proxxon drilling support - 28600Head with dovetail steerable at 90 degrees (graded ring available). Allows for sloping drilling and multi-purpose milling. 

MICROMOT clamping pliers, 6 clamps 1.0 to 3.2 mm Proxxon - 28940Has three slots and soaked. Sizes: 1 - 1.5 - 2 - 2.4 - 3 and 3.2. With clamping nut and storage base

OFV - Cutting adapter, guide for milling Proxxon 28566 For MICROMOT tools with 20 mm collar. For grooving, milling grooves and edges.

Primus 100 Proxxon Jaw Prism Sliding Machine Vice - 20402Bit width of 100 mm.Aperture 75 mm.

Primus Proxxon vice fastening set - 20394

Replacement blade for Proxxon blade holder - 24554HSS cobalt blade.12 x 3 x 85 mm

Spare cutting wire for THERMOCUT 12/E, 10 pieces Proxxon - 2808210 deformable cutting wires 285 x 0.85 mm.

Replacement wire coil for THERMOCUT, 30 m Proxxon - 28080Coil 30 m x 0.2 mm.

Set of 5 turning tools in HSS steel, in Proxxon wooden box - 27023Superior quality and most common shapes: scraper, 3 mm and 6.4 mm tubes, sharp chisel and slice.

Stop for hot wire cutter THERMOCUT TA 300 Proxxon - 27078For the production or reproducible precise of geometric shapes. For safe cutting of tall workpieces.

Stop for hot wire cutter THERMOCUT TA 300 Proxxon - 27078For the production or reproducible precise of geometric shapes. For safe cutting of tall workpieces.

Separate tool holder fits on the turret of the PD 250/E Proxxon lathe - 24026For chisel support ref 24026.

Toothed crown chuck for TBM 220, 0.5 - 6.5 mm Proxxon - 28122For stems from 0.5 to 6.5 mm.3/8" thread, compatible with TBM 220.

UHZ - Universal support with clamp, 20mm collar for all MICROMOT Proxxon machines - 28610With patella. Orientable from all sides.

Universal turret for tower PD 250/E Proxxon - 24026Chisel support, easy assembly!For quick replacement of chisels and easy height adjustment.

Flexible 110/BF, with 3-jaw chuck - 28622With precision aluminum accessory holders. With steel clamps.

MS 4 - MICROMOT machine strand machoire 50 mm for TBM, MB 140/S and MB 200 - 28132Aluminium cast iron.

Spindle chuck for the counter-doll for DB 250 Proxxon - 27028Clamping up to 5 mm. To be fixed instead of the rotating counter-tip.