Electronics

Radiator with 1 fan for engine type 1/8th o44mm.Voltage of 5V to 7.2V fanFan dimension: 50x50x10mm

Radiator with 1 fan for motor type 540 - 1/10th ø36mm.Voltage of 5V to 7.2V fanFan dimension: 48x48x16mm

RadioLink Radio AT10II 2.4GHz 12-channel + R12DS receiver + PRM-01 telemetry · 12 lanes • Control distance of 4 km • Telemetry support.

Voltage: 6V to 8VSocket: SpoutWeight: 13grDimensions: 30x30x10mm

This HS-785HB winch servo is a servo with high torque (11 to 13.2kg/cm) and developing 3 and a half turns designed for violiers. Its output bearing as well as its carbonite sprockets.

Speed: 0.17sec/60° (4.8V) - 0.14sec/60° (6.0V)Torque: 3,6kg.cm (4,8V) - 4,3kg.cm (6.0V)Dimensions: 29x13x30mmWeight: 21.9g

Speed: 0.16sec/60 degrees (4.8V) - 0.14sec/60 (6.0V)Torque: 3.0kg.cm (4.8V) - 3.5kg.cm (6.0V)Dimensions: 29x13x30mmWeight: 19.2g

Compact and powerful LiPo battery charger, perfect for charging your 2S and 3S Li-Po batteries. USB-C type power supply allowing it to be connected to a high power USB-C adapter, such as a mobile phone, tablet, etc.

Radio set with receiver KN-KR21 (2 in 1) 2.4 GHZ Konect KT3X. For Funtek STX / MTX.

Konect KT3X 2.4 GHZ radio and receiver set

KR3X 3-Channel Receiver for KT3X Konect Radio

Programmable quick charger T2M Wizard 2 X double outputs. T1248 Power 12V, or sector 80W per outputdelivered with various charge cords.

Dimensions: 185x80x80 mm

Compatible up to 6s Lipo. Silicone 22AWG cable.Length: 20cm

Metal sprockets for servo Traxxas 2085 or 2085X, X-Maxx.

Torque: 1, 3kg.cm (4, 8V)Speed: 0.17 "/ 60 °"Weight: 9.5 gSize: 22.8 x 11.6 x 24 mm

Speed: 0, 17 sec / 60 ° (4, 8V)-0, 14 sec / 60 ° (6.0V) Torque: 1, 1kg.cm (4, 8V)-1, 3kg.cm (6.0V) Dimensions: 22.8x11.6x24mm Weight: 8.0 g

Size: 23x11x24mmWeight: 11.9 gSpeed: 0, 1ssec / 60 ° (6V) torque: 2, 2kg.cm

Analog servo of 2.5 gSpeed: 0.12 sec / 60 degrees below 6VTorque: 0.7 kg/cm² under 6V

Servo analog 3.7 g.Speed: 0. 12 sec / 60 °Couple : 0.7 kg.cm Universal Socket.

-torque: 3 kg/cm-displacement: 0.11 s / 60 °-weight: 19 g-dimensions: 30.5 x 14 x 27.9 mm-Gables plastic We recommend to replace the origin by the servo Savöx SW - 0250MG servo. (metal, more powerful gear...)Original servo 1/16 E-Revo, Slash, Summit...

Mini display of power running from 2.5 to 30V. Size: 31 × 12 × 9mm Supplied without connector. Color display delivered randomly.

Power: 3, 0Kg.cmSpeed: 0, 09sec / 60 °Dimensions: 30x12x30mmWeight: 16.6 g

Universal rudder servos. Comes with 3 adapters for servos (23, 24 and 25T) Futaba, Savox, Sanwa, KO, ACE...

Complete pack specially designed for Tamiya 1/14 trucks with MFU Kit.Pre-configured radio with set limit switches.This kit is ready to install in your truck.

Pack Radio Racer 3S + Pocket Wizard charger + 2S 3500mAh Lipo battery + T224 servo from the brand T2M reference T4618L1.A complete pack for Tamiya RC cars sold as a kit for example!

Perfect for drone racer. Pads Led front or rear size: 10x20mm by PadPad led left + right + cord 15cm + 10 Prewired cm double-sidedPower 3s lipo 12V

Perfect for drone racer. Pads Led front or rear size: 10x20mm by PadPad led left + right + cord 15cm + 10 Prewired cm double-sidedPower 3s lipo 12V

Perfect for drone racer. Pads Led front or rear size: 10x20mm by PadPad led left + right + cord 15cm + 10 Prewired cm double-sidedPower 3s lipo 12V

For 2s to 6s Li - Po batteries. LiPo: System 1 (Power/LemonRC Kokam/Graupner/Robbe/Kavan/Saehan/Simprop/AHA/Xcell/Pichler/Red) System 2 (Jamara/Ripmax/PolyQuest) System 4 (FlightPower/ThunderPower/Multiplex) System 6 (Align Dualsky JST XH, Torcster, Hype, nVision) Balancer: System 6 (Align...

Multi-standard balancing 2 S - 6s Platinum (HP/PQ, TP/FP, XH, EH), fits on all of the Chargers with a 6s JST - XH balance sheet.

SkyRc Dual Port Safe Parallel XT60 & XH SK-600071 Connector Lipo 2 S - 8 S XH connector Fuse protection.

Power supply 230VAC Traxxas - 12V 40W 2976G -Allows shippers Traxxas 12V socket power "Lighter" original with a mains 230Vac socket.-Inverter continuous AC 3 .5A 40W

Charger/UNloader PROQUAD 4 outputs for accus NiMh, NiCd, Li-Ion, LiPo , LiFe and Pb with built-in swing, on 12 volts or 240W (4x100w).With 4 independent circuit, the power is 100W per circuit or 400W in total.The ProQuad can charge up to 4 x 15 NiCd/NiMH cells or 4 x 6S Li-Po. Each output can...

Dimensions: 300x225mm Weight: 123g

Dimensions: 220x180mm Weight: 80g

Here is the new EX4GT 4-way radio from Etronix. Comes with 4-way receiver.

6-channel receiver for Etronix EX6G radio.

6-way receiver with built-in Gyro for EX6G Etronix radio.

Charger fast Traxxas Lipo/Nimh 40W 4A iD 2970 G with 1 battery Lipo Traxxas 2s 25 c 5800mah. 1 x charger Compatible only with the Traxxas connectors iD.1 x battery Li - Po 2 S 5800mah with connector iD. Automatic recognition of the Traxxas batteries iD. Charge indicator. Compatible connector...

Integrated 220V alternative power chargerRecommended to charge Li-PO, Li-ION, Li-FE (2S to 3S: 6.6V to 11.1V), and Ni-MH, Ni-CD (4-8S: 4.8V to 9.6V).

RadioLink R6FG Receiver· 6 channels· Control distance of 400 meters· Integrated gyroscope and HV servo Supported· Support for telemetry up to 8S for the propulsion battery.

RadioLink R8EF Receiver· 8 channels· Control distance of 2,000 metres