Electronics

Radio Racer 3S Pack + Ni-Mh Charger + 7.2V 1800mAh NiMh Battery + T224 Servo from the brand T2M reference T4618L. A complete kit for Tamiya RC cars sold as kits, for example!

Radio control - 3-way MHD 3S receiver in 2.4 GHz for car or boat on Li-Ion battery with USB charger.

This is Etronix's new 6-way EX6G radio. Comes with 6-way receiver.

Plane 6 radio channels not programmable with receiver. Mode 1 : Depth and drifting left - gas and aileron stick right stick. • Reversal of the direction of rotation (on 4 tracks) • Electronic trims on the 4-way • Adjustable length sleeves • Delta wing selector or classic • Switches for channels 5...

Plane 6 radio channels not programmable with receiver. Mode 2 : Gas and drift left - depth and aileron stick right stick • Reversal of the direction of rotation (on 4 tracks) • Electronic trims on the 4-way • Adjustable length sleeves • Delta wing selector or classic • Switches for channels 5 and...

Complete pack specially designed for Tamiya 1/14 trucks with variator (without MFU kit).Pre-configured radio with set limit switches.This kit is ready to install in your truck.

3-way car radio with receiver T2M Racer 3S - T4618

RadioLink R6FG Receiver· 6-way· Control Distance 400 meters· Built-in gyroscope and HV servo Supported· Support for the telemetry up to 8S for the propulsion battery.

Receiver 6 channels for remote T2M Pilot 6 X. • Dimensions: 47 x 23 x 13mm • Weight: 11 g

24 teeth

Couple: 12 kg - cm @ 6VSpeed: 0.08 sec / 60 ° @ 6V

Save servo alu 25T red for vehicle 1/103 springs for hardness adjustment

Digital-Size: 41.8/20.2/42.9 mm - Weight: 66 g- @6.0v: Speed 0.17/60° Torque 15 kg-cm - @7.4v: Speed 0.15/60° Torque 25 kg-cm - Sprocket: Metal - Full waterproof body

Speed: 0.16 sec / 60 ° (6.0V), 0.13 sec / 60 ° (7.4V)Torque: 36 Kg.cm (6.0V), 42Kg.cm (7.4V)

Speed: 0.15 sec / 60 ° (6.0V), 0.12 sec / 60 ° (7.4V)Torque: 25 Kg.cm (6.0V), 32Kg.cm (7.4V)

Speed: 0.105 sec / 60 ° (6.0V), 0.08 sec / 60 ° (7.4V)Torque: 20 Kg.cm (6.0V), 25Kg.cm (7.4V)

These servomotors high speed have a engine redesigned. This servo is equipped of bearings ball and sprockets steel, and weighs only 69 grams. Perfect for the crawlers.Features : DigitalDimensions: 40.7 x 20 x 45mmWeight: 69gSpeed (sec/60 °) :- @ 6V÷4V: 0.16 Torque (Kg-cm/Oz-in) :- @ 6.0V :...

-Digital-Dimensions: 54 x 20, 2x37.2mm-Power: - 7.4V - 20 kg - cm-Speed: - 6.0V - 0.11sec / 60 ° - 7.4V - 0.095sec / 60 °-Power supply: 4.5V - 7.4V-Weight: 62 g-Engine: Coreless-Gears: steel-Housing: aluminum

SD4LiPo/LiFe/NiMh charger Charger for LiPo, LiFe and Ni-Mh batteries with balancer built-in, 100-240V mains. Features: Load batteries Lipo, LiFe 2 S 4 S and NiMh 4 S to 8 S.Power supply: AC 100-240vCharge current: 1 A / 2A / 3A Comes with a charge DEAN lead.

Servo Konect 7kg 0.11s Digital KN-0711LVMG metal sprockets.- Case: Composite- Size: 40.5x20.2x38mm- Torque at 4.8V: 6.5kg - 0.13S/60°- Torque at 6V: 7.5kg - 0.11S/60°- Weight: 55gr- Sprockets: Metal

Servo Konect 15kg 0.15s Digital KN-1515LVMG metal sprocket- Size: 40.5x20.2x38mm (length x width x height)- Torque and speed at 4.8V: 13.6kg - 0.17S/60°- Torque and speed at 6V: 15.8kg - 0.15S/60°- Weight: 55gr- Engine: Core- Case: Composite- Sprockets: Metal

Servo Konect 21kg 0.13 s Digital KN-2113LV -Weight: 58 g -@ 4.8V speed: 0.18 S / 60 ° torque 16.5 kg - cm -@ 6V speed: 0.16 S / 60 ° torque 21.8 kg - cm -Metal gears -Housing plastic / Aluminium -Waterproof

24 teeth

Width: 20 mmHeight: 37 mmLength: 41 mmWeight: 41.7gTorque at 6.0 volts: 3 kg/cm52 rpm - 6V

Digital- 6.0v: Speed 0.13/60° Torque 3.9 kg-cm- Metal gears- Dimensions 22.8X12.0X29.4 mm- Weight 15.8gr- Aluminum housing- 1x bearings

Digital- 6.0v: Speed 0.16/60° Torque 4.6 kg-cm- Metal & nylon sprockets- Dimensions 22.8X12.0X29.4 mm- Weight 15.8gr- Aluminum housing- 1x bearings

Digital- 6.0v: Speed 0.16/60° Torque 2.6 kg-cm- Metal & nylon sprockets- Dimensions 22.8X12.0X25.4 mm- Weight 12.3gr- Aluminum housing

Operating speed : 0.07sec/60 ° at 3.7V - 0.06sec/60 ° at 4.2V Stall torque : 95 g/ cm at 3.7V - 110 g/ cm at 4.2V Operating voltage : 3.7V to 4.2V

Torque: oz-181 (13 kg - cm) @ 6.0Voz-in 292 (21 kg - cm) @ 7.4VSpeed: 0.11 sec / 60 ° @ 6.0V7.4V @ 00:09 sec / 60 °

The aluminum housing is waterproof, allowing it to be used in wet or dusty conditions. This servo is suitable for large scale aircraft and 1/8th scale monster trucks.SA (Servo Aircraft) version: Servo designed for airplanes and helicopters with minimal gear clearance.

These servomotors high speed have a engine redesigned. This servo is equipped with bearings ball and gear steel, and weighs only 79 grams.Features:DigitalSize: 40.3 x20.2 x 45mmWeight: 79gSpeed (sec/60 °) :- @ 4.8V: 0.08- @ 6.4V: 0.07Torque (Kg-cm/Oz-in):- @ 4.8V : 10.0/138.9- @ 6.0V : 13.0/180.5

Digital servo SAVOX low profile, sprockets metals, 2 bearings Features: Size: 40.8 x 20.2 x 25.4 mmVoltage: 4.8 to 6 vWeight: 48grSpeed: 0,076 (6, 0V)Torque: 10, 0 kg/cm (6, 0V)

Low profile digital servo Speed: 0.10 (4, 8V) 0.09 (6, 0V)Torque: 7, 0 kg/cm (4, 8V) 9. 0 kg/cm (6, 0V)

Quality torque digital servo for crawlers, 1/8 cars and class 50 aircraft. The sprockets are made of metal and it is mounted on double bearings.SC (Servo Car) version: Servo designed for cars with a set of the pinion slightly higher than the SA versions, but less than 0.5°.Speed (dry/60°) :- @...

Quality torque digital servo for crawlers, 1/8 cars and class 30 aircraft. The sprockets are made of metal and it is mounted on double bearings.SC (Servo Car) version: Servo designed for cars with a set of the pinion slightly higher than the SA versions, but less than 0.5°.Size: 40.7 x 19.6 x...

Size: 40.3 x 20 x 37.2mmWeight: 52.4gSpeed: 0.18 (4.8V) to 0.15 (6.0V) Torque: 16kg/cm (4.8V) 20kg/cm (6.0V)Gears: titanium and aluminumCase: Aluminium

Dimensions: 40.3 x 20 x 37.2mm Weight: 52.4g 6V speed : 0.08 (sec/60° ) 6V torque : 12kg/cm2 Gears: titanium and aluminum Case: Aluminum

- Dimensions: 40.3x20.2x37.2mm-Power:   - 7.4v - 25 kg-cm  - 8.4v - 30 kg-cm-Speed:   - 7.4V - 0.11sec/60°  - 8.4V - 0.10sec/60°- Power supply: 4.5v-8.4v- Weight: 62g

Servo Savox SV-0235MG Top Voltage Digital Scale 1/5th with metal gables.Dimensions (mm): 65.8x30x57.4Weight (g): 200Mass (g): 200Speed: 0.18 sec/60 degrees (6.0V), 0.15 sec/60 degrees (7.4V)Torque: 28 Kg.cm (6.0V), 35 Kg.cm (7.4V)Gables: Metal

SAVOX 35x15mm DIGITAL 7.4V 4kg-0.055s servoMini servo with metal sprockets that is fast and can run directly on a receiving Lipo batteryNew: the + of the + series:- Soft start: soft start- Compatible with Sanwa SSR modeCharacteristics:Torque at 6v: 2.5 kgTorque at 7.4v: 4 kgSpeed at 6v: 0.07...

The servo Savox SW-1210SG has a completely waterproof plastic box, allowing you to use it in any conditions: rain, snow, mud... SW-1210SG is mounted on double turnover and with metal pinions, it is perfect for cars and boats. Digital-Dimensions: 40.6/20.7/42 mm -Weight: 71 g -@4.8v: speed 0.18 /...

1 rudder delivered 25T.Total length: 45mmM3 threaded holes.

Dimensions: 240x65x180mm